3D Printer Oil and Grease Pens for Linear Rails, Lead Screws and Bearings

지금이 역대 최저가예요

역대 최저가(2026년 10월 30일, 21,395원)와 같아요. 이 가격은 흔치 않아요. 지금 구매를 추천해요.

$15.99 21,395원

10월 31일 기준 아마존 실시간 가격 확인 ↗

최저 $15.99 평균 $16.16 최고 $17.99

해외직접배송 · 관세·배송비 별도

지금 역대 최저가

기록 12일

마지막 변경 10월 20일 24,071원 → 21,395원 ▼11% · 7일 전과 같음 · 14일 동안 1번 바뀜(가끔)

보통 가격 21,395원 현재 21,395원

그래프 로딩 중…

최저21,395원10/31 · 최저가 11일
평균21,618원
최고24,071원10/17
기록12일10/17~10/31

가격 변동 내역

가격이 바뀐 날(최근 순). 기록이 없는 기간도 함께 적었습니다.
날짜가격변화
10월 20일 21,395원 $15.99 역대 최저 ▼11%
10월 17일 24,071원 $17.99 기록 시작

아마존 달러 가격을 오늘 환율($1 = ₩1,338)로 환산해 표시합니다. 그날 환율 기준 금액은 그래프를 짚으면 보입니다.

⇄ 다른 상품과 가격 추이 비교

한눈에 요약

3D Printer Oil and Grease Pens for의 가격은 10월 31일 기준 $15.99(약 21,395원)입니다. 지금이 추적 기간 역대 최저가 수준입니다(최저 $15.99, 10월 31일). 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗

한국까지 예상 비용

상품가
$15.99 (약 21,395원)
면세 한도
$200 (목록통관) · 이하라 면세 예상
예상 합계
약 21,395원 + 배송비
배송비 넣어 다시 계산해 보기 →
  • 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
  • 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
  • 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
  • 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.

상품 특징

  • 3D 프린터 부품 및 액세서리
  • Two-in-one lubricant kit: Includes one 5 ml PAO-based synthetic oil pen and one 5 ml lithium grease pen for compatible 3D printer linear rails, lead screws, rods, bearings and motion parts
  • Twist-controlled brush pens: Turn the base to dispense lubricant through the 10 x 5 mm fiber brush tip for controlled application without a separate syringe, dropper or cotton swab
  • Oil and grease for different parts: Light-flowing synthetic oil provides controlled coverage, while thicker lithium grease stays on the applied surface where grease is recommended
  • No-mess, ready-to-use : Both pens arrive filled and sealed to simplify application and help reduce spills
  • compact size stores easily with printer tools and maintenance accessories
  • Simple routine maintenance: Clean the contact area, apply a thin layer, move the component to distribute the lubricant, wipe away excess and recap
  • follow your printer manufacturer’s lubrication guidance