Industrial Thin Graphene Nanoplatelets, 99% Carbon, 1-6 nm, 50 g

가격이 거의 변하지 않아요

기록된 7일 동안 가격이 바뀐 적이 없어요. 언제 사도 가격 차이가 크지 않아요.

$49.99 66,712원

10월 18일 기준 아마존 실시간 가격 확인 ↗

해외직접배송 · 관세·배송비 별도

변동이 거의 없는 가격

기록 7일

기록된 7일 동안 가격 변동 없음

현재 66,712원

그래프 로딩 중…

가격변동 없음기록된 7일 동안
평균66,712원
기록7일10/11~10/18

아마존 달러 가격을 오늘 환율($1 = ₩1,335)로 환산해 표시합니다. 그날 환율 기준 금액은 그래프를 짚으면 보입니다.

⇄ 다른 상품과 가격 추이 비교

한눈에 요약

Industrial Thin Graphene Nanoplatelets의 가격은 10월 18일 기준 $49.99(약 66,712원)입니다. 기록된 7일 동안 가격 변동이 거의 없었습니다. 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗

한국까지 예상 비용

상품가
$49.99 (약 66,712원)
면세 한도
$200 (목록통관) · 이하라 면세 예상
예상 합계
약 66,712원 + 배송비
배송비 넣어 다시 계산해 보기 →
  • 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
  • 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
  • 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
  • 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.

상품 특징

  • Industrial & Scientific
  • Lab & Scientific Products
  • Image Unavailable Image not available forColor:
  • THIN GRAPHENE, USEFUL SPEC RANGE – More than 99 at% carbon with a measured thickness of 1-6 nm and lateral size of 1-5 μm. The 50 g pack is sized for material screening, comparison tests and small-batch formulation work.
  • BUILT FOR CONDUCTIVE FORMULATIONS – Conductivity measures 800-1100 S/cm, making the powder a practical candidate for conductive coatings, inks, resins, plastics and rubber compounds. Final performance depends on loading, dispersion and the host material.
  • FOR BATTERY & SUPERCAPACITOR R&D – Suitable for evaluating graphene as a conductive carbon additive in electrode slurries, current-collector coatings and energy-storage composite formulations.
  • ANTISTATIC & THERMAL MATERIAL PROJECTS – Use in ESD polymer composites, conductive masterbatch trials, printed electronics and thermal-management formulations where a thin carbon platelet additive is required.
  • REAL DATA, READY FOR THE LAB – Produced by liquid-phase ultrasonic exfoliation, with ash below 1 wt%, moisture below 2 wt% and D50 around 26.03 μm. Pre-wetting followed by high-shear mixing or sonication is recommended.