Upgraded for SparkX i7 Smooth PEI Build Plate
- 상품가
- $29.99 (약 40,310원)
- 면세 한도
- $200 (목록통관) · 이하라 면세 예상
- 예상 합계
- 약 40,310원 + 배송비
가격 변동
가격 추적을 막 시작했어요
하루에 한 번 가격을 기록합니다. 기록이 이틀 이상 쌓이면 여기에 가격 변동 그래프가 그려져요.
한눈에 요약
Upgraded for SparkX i7 Smooth PEI Build의 가격은 9월 15일 기준 $29.99(약 40,310원)입니다. 가격 이력이 아직 짧아 역대 최저가와 비교한 판단은 보류합니다. 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗
한국까지 예상 비용
- 상품가
- $29.99 (약 40,310원)
- 면세 한도
- $200 (목록통관) · 이하라 면세 예상
- 예상 합계
- 약 40,310원 + 배송비
- 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
- 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
- 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
- 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.
상품 특징
- Industrial & Scientific
- Additive Manufacturing Products
- 3D Printer Parts & Accessories
- 3D Printer Platforms
- Image Unavailable Image not available forColor:
- 1.【 One plate, two surfaces – mature engineering for all filaments】：a.Gold spray side-- Proprietary PEI powder coating (stronger adhesion, finer texture), stainless steel core (faster heating, higher flex resistance). Supports PLA, PETG, ABS, TPU, PC, nylon – up to 300°C. b.Black PEI film side-- 100% imported PEI film with upgraded 3M adhesive (no bubbling, no lifting). Smooth flat finish, mirror-like bottom for PLA/PETG. One plate, two surfaces – mature and reliable.
- 2.【 Gold spray side – market-proven, beginner-friendly, great value】： Market-proven for years – stable, easy to use. Our proprietary PEI powder delivers far stronger adhesion than ordinary sprays – even beginners succeed easily. PLA can be printed at 50-55°C (vs 60-70°C), PETG 5-10°C lower – save energy, reduce warping. Supports high-temp engineering filaments like ABS, TPU, PC, nylon. Easy cleaning – use alcohol or mild dish soap, won't damage coating. One plate replaces multiple plates – unbeatable value.
- 3.【 Black PEI film side – upgraded 3M adhesive + imported film, bubble-free】： Ordinary PEI film often suffers from bubbling, lifting, scratches. We use 100% imported PEI film + upgraded 3M adhesive – completely bubble-free, perfectly flat. Prints PLA (55-70°C), PETG (≤70°C) with a smooth, glossy bottom – no orange peel, no sanding. Removal: cool → bend → pop, plastic scraper allowed. Alcohol-safe, easy clean. Peel off protective film before first use.
- 4.【 Stainless steel core + high‑temp filament printing guide】： We use stainless steel (not cheap manganese/spring steel) – uniform heating, faster warm‑up, higher flex resistance, long‑term flatness. 0.5mm balances rigidity and flexibility.⚠️ For ABS / TPU / PC / nylon:1.Add brim/raft to increase contact area
- 2.Slow first layer speed (e.g., 10‑15 mm/s)
- 3.Use glue stick if needed (water‑soluble)
- 4.Keep ABS at 70‑90°C (do not lower),Follow these tips for stable, warp‑free results.
- 5.【 Fits Creality K2 & how to use】：Size: 270x293mm – perfect fit for Creality K2.Steps: ① Place plate on heated bed. ② Select correct mode (High‑Temp/Textured PEI for gold side
- Smooth PEI for black side). ③ Level bed – nozzle at one A4 paper thickness (too low = permanent scratch). ④ Set temperature accordingly (gold side up to 300°C, black side ≤70°C). ⑤ Print → Cool → Bend → Pop. ⑥ Clean either side with 70%+ alcohol or mild dish soap, dry.[Bottom line]: Mature product, self‑developed core, solid materials, beginner‑friendly, great value. Upgrade your printing today.