26FT D자형 EPDM 웨더 스트리핑, 1.9 x 1 cm
- 상품가
- $25.90 (약 34,808원)
- 면세 한도
- $200 (목록통관) · 이하라 면세 예상
- 예상 합계
- 약 34,808원 + 배송비
- 브랜드
- ALVOTREX
- 색상
- Black
- 크기
- 2.5 × 2.5cm (1 × 1 in)
- Item Thickness
- 0.38 inches
- 용도
- Door
가격 변동
기록된 3일 동안 가격 변동 없음
현재 34,808원
그래프 로딩 중…
아마존 달러 가격을 오늘 환율($1 = ₩1,344)로 환산해 표시합니다. 그날 환율 기준 금액은 그래프를 짚으면 보입니다.
⇄ 다른 상품과 가격 추이 비교한눈에 요약
26FT D자형 EPDM 웨더 스트리핑, 1.9 x 1 cm의 가격은 11월 4일 기준 $25.90(약 34,808원)입니다. 가격 이력이 아직 짧아 역대 최저가와 비교한 판단은 보류합니다. 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗
한국까지 예상 비용
- 상품가
- $25.90 (약 34,808원)
- 면세 한도
- $200 (목록통관) · 이하라 면세 예상
- 예상 합계
- 약 34,808원 + 배송비
- 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
- 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
- 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
- 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.
상품 특징
- Tools & Home Improvement
- Building Supplies
- Weatherproofing
- Weather Stripping
- Image Unavailable Image not available forColor:
- Check The Size First: This universal D-shaped seal measures 3/4 in wide x 3/8 in high (19 x 10 mm) and is 26 ft long. Measure the mounting surface and closing clearance before ordering
- it is not a vehicle-specific molded seal
- Seal Everyday Gaps: The hollow D profile compresses between two closing surfaces to help limit drafts, dust, splashes, rattles, and contact noise around doors, windows, lids, hatches, and access panels when correctly sized and installed
- Flexible EPDM Construction: Black EPDM foam bends around gentle curves and the hollow chamber cushions closing contact. Use it as replacement weather stripping where a 3/4 x 3/8 in adhesive-backed D profile matches the original space
- Prepare, Position, And Press: Remove old residue, clean and fully dry the surface, test the route, then peel the red liner a little at a time. Apply without stretching, press firmly along the full length, and allow the adhesive time to set
- One Cut-To-Fit 26FT Roll: Trim the continuous strip for home doors and windows, RV or trailer compartments, automotive openings, truck caps, marine hatches, toolboxes, cabinets, and equipment covers
- verify dimensions for each project