60ml 3D Printer Lubricating Oil 2oz for XY Axis Bearings Linear Rails
- 상품가
- $15.99 (약 21,493원)
- 면세 한도
- $200 (목록통관) · 이하라 면세 예상
- 예상 합계
- 약 21,493원 + 배송비
가격 변동
가격 추적을 막 시작했어요
하루에 한 번 가격을 기록합니다. 기록이 이틀 이상 쌓이면 여기에 가격 변동 그래프가 그려져요.
한눈에 요약
60ml 3D Printer Lubricating Oil 2oz for의 가격은 9월 18일 00:52 기준 $15.99(약 21,493원)입니다. 가격 이력이 아직 짧아 역대 최저가와 비교한 판단은 보류합니다. 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗
한국까지 예상 비용
- 상품가
- $15.99 (약 21,493원)
- 면세 한도
- $200 (목록통관) · 이하라 면세 예상
- 예상 합계
- 약 21,493원 + 배송비
- 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
- 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
- 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
- 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.
상품 특징
- Industrial & Scientific
- Adhesives, Sealants & Lubricants
- Industrial Lubricants
- Image Unavailable Image not available forColor:
- Large Capacity: This 3D printer oil comes in a generous 60 ml / 2 oz bottle, providing ample lubricant for repeated routine maintenance and helping reduce frequent repurchasing. The 3D printer lubricating oil is designed for X Y axis bearings, smooth rods, and other compatible moving parts, making it practical for hobbyists, and multi-printer workspaces.
- Precision Tip Design: The narrow dispensing tip gives controlled flow so you can place 1 to 2 drops directly on X Y axis rods or linear bearings without pouring excess oil. This 3D printer lubricant supports precise maintenance, while the machine oil format reaches narrow gaps more easily than thick grease. Use grease instead on Z axis threaded lead screws and gears.
- Smooth Lubrication: This 3D printer lube uses a premium purity synthetic silicone oil formula with high penetration and friction resistance. It forms a lubricating film on moving metal surfaces to help reduce dry rubbing, squeaks, drag, rust, and oxidation. The bearing lubricant is intended for smooth rods and linear bearings and is formulated for use around printer plastics, rubber belts, and metal rods.
- Easy Oil Application: Wipe old oil and dust from the X Y axis rail or smooth rod with a lint-free cloth, then apply 1 to 2 drops of X Y axis lubricant along the rod or bearing area. Move the axis by hand or run a short motion test to spread the oil evenly. This 3D printer maintenance routine works well after cleaning, bearing replacement, or when movement becomes noisy or resistant.
- Widely Use: This 3D printer bearing lubricant is compatible with X1C, A1, A1 mini, P1S, and P1P printers and is suitable for ball bearings, linear bearings, smooth rods, and other X Y axis moving parts on mainstream FDM printers. The linear rail lubricant helps maintain smooth movement and reduce friction during routine printer care. For Z axis threaded lead screws and gears, use grease instead of liquid oil.