20Ft Truck/Car Door Weather Stripping,Large D-Type 4-Hole Car Door Seal
- 상품가
- $9.99 (약 13,255원)
- 면세 한도
- $200 (목록통관) · 이하라 면세 예상
- 예상 합계
- 약 13,255원 + 배송비
- 브랜드
- BILEKSU
- 소재
- Ethylene Propylene Diene Monomer Rubber
- 색상
- Black
- 크기
- 609.6 × 1.2cm (240 × 0.47 in)
- Item Thickness
- 0.46 inches
변동이 거의 없는 가격
그래프 로딩 중…
아마존 달러(USD) 가격을 각 날짜의 환율로 원화 환산해 표시합니다. 현재 환율 $1 = ₩1,327
⇄ 다른 상품과 가격 추이 비교한눈에 요약
20Ft Truck/Car Door Weather Stripping의 가격은 10월 22일 01:21 기준 $9.99(약 13,255원)입니다. 가격 이력이 아직 짧아 역대 최저가와 비교한 판단은 보류합니다. 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗
한국까지 예상 비용
- 상품가
- $9.99 (약 13,255원)
- 면세 한도
- $200 (목록통관) · 이하라 면세 예상
- 예상 합계
- 약 13,255원 + 배송비
- 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
- 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
- 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
- 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.
상품 특징
- Replacement Parts
- Weather Stripping
- Image Unavailable Image not available forColor:
- Enclosed Seal Design: This door seal strip wraps the opening all the way around with a big D-shaped structure, and 4 hollow inner channels plus a triangular structure give it bounce, so it blocks dust, water, and road noise instead of letting them work their way into the cabin
- Bendable EPDM Material: You can bend this automotive weather stripping around tight corners and curved frames because the EPDM stays flexible, and it does not crack or harden in cold weather, so the seal hugs the gaps on cars, trucks, SUVs, and RVs without letting air slip past
- Dimensions & Suitability: This car weather stripping door seal comes as a single 20 ft roll with a 0.47 x 0.46 inch cross section, works on car doors, the hood, and the trunk lid, and fits whether the car already has a strip or not, one 20-foot roll covering a single door
- Waterproof Channel Design: The rubber seal strip is backed with a self-adhesive that includes a water-guard groove to protect the glue, so it sticks firmly and does not peel away or lose tack over time, even through temperature swings
- Tips for Use: Cut the rubber seal to the length you need, clean the surface first, then heat the backing with a hair dryer to soften the adhesive, and press it on, so the seal sets firmly within minutes and holds a clean finished edge. Ideal for DIY vehicle‑modifying enthusiasts