3.8cm(1-1/2인치) 연료 필러 호스 길이 121.9cm(48인치) 58524 해양 연료 필러 배기 호스
- 상품가
- $37.99 (약 51,056원)
- 면세 한도
- $200 (목록통관) · 이하라 면세 예상
- 예상 합계
- 약 51,056원 + 배송비
변동이 거의 없는 가격
기록 10일
마지막 변경 10월 23일 52,400원 → 51,056원 ▼3% · 7일 전과 같음 · 14일 동안 1번 바뀜(가끔)
보통 가격 51,056원
현재 51,056원
그래프 로딩 중…
가격거의 그대로51,056원~52,400원
평균51,190원
기록10일10/18~11/1
가격 변동 내역
| 날짜 | 가격 | 변화 |
|---|---|---|
| 10월 23일 | 51,056원 $37.99 역대 최저 | ▼3% |
| 기록 없음 10/19~10/22 (4일) | ||
| 10월 18일 | 52,400원 $38.99 | 기록 시작 |
아마존 달러 가격을 오늘 환율($1 = ₩1,344)로 환산해 표시합니다. 그날 환율 기준 금액은 그래프를 짚으면 보입니다.
⇄ 다른 상품과 가격 추이 비교한눈에 요약
3.8cm(1-1/2인치) 연료 필러 호스 길이 121.9cm의 가격은 11월 1일 기준 $37.99(약 51,056원)입니다. 기록된 10일 동안 가격 변동이 거의 없었습니다. 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗
한국까지 예상 비용
- 상품가
- $37.99 (약 51,056원)
- 면세 한도
- $200 (목록통관) · 이하라 면세 예상
- 예상 합계
- 약 51,056원 + 배송비
- 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
- 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
- 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
- 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.
상품 특징
- Motorcycle & Powersports
- Image Unavailable Image not available forColor:
- 【1.5" ID × 48" Length, 2 Clamps Included】This 1.5 fuel filler hose is built with a 1.5-inch inside diameter and a 48-inch overall length, 58524 marine fuel filler hose is suitable for connecting to a variety of marine fuel filler necks, fuel tank vent lines, and exhaust pipes. Two hose clamps are included so you can begin installation without searching for extra hardware. Always confirm your connection size before ordering.
- 【Marine-Grade Durable Material】1 1/2 marine fuel fill hose features two layers of synthetic rubber sandwiching high-tensile strands, which help resist squeezing, flattening, and collapsing under pressure or suction. The black outer layer is designed to withstand salt spray, damp bilges, sunlight, ozone, and contact with fuel. This reinforced design ensures the hose will provide long-term service in harsh marine environments
- 【Handles Gasoline, Methanol, Ethanol, and Diesel】This marine grade fuel line is compatible with common boat fuels, including gasoline, methanol, ethanol, and diesel. The marine exhaust hose can be used for fuel filler, tank venting, or marine exhaust plumbing, making it a practical choice for replacing aged or damaged lines on boats and yachts. One hose covers several low-pressure marine routing needs.
- 【Flexible in Cold, Stable in Heat: -25°F to 212°F】The marine fuel fill hose 1.5 inch is designed to stay workable in cold weather and maintain structural stability in hot engine areas. Its flexible body can be routed through tight compartments and around bends with less risk of pinching or blocking flow. This helps simplify installation in crowded bilges and under-deck spaces.
- 【Low-Restriction Bore and Simple Installation Checks】The smooth inner bore supports steady fuel or exhaust flow and helps reduce restriction. Install away from hot or sharp surfaces, avoid twists, tighten both clamps, and check for weeping at the connections. Inspect regularly for cracks, swelling, hardening, soft spots, leaks, or kinked sections, and replace the hose when wear is found.