2 Pack DCV5801H HEPA Filter For DCV580 DCV581H ,4 Foam Sleeves 2 Brushes

상품 특징

• Vacuums & Floor Care
• Vacuum Parts & Accessories
• Handheld Filters
• Image Unavailable Image not available forColor:
• FITS THESE DEWALT 2-GALLON VACS - Replacement cartridge for DEWALT DCV580, DCV580H, DCV581 and DCV581H 2-gallon wet/dry vacuums. Replaces part number DCV5801H. Check the model number on your vacuum before ordering. Not for the DCV501 or DCV5011H handheld vacuums.
• HEPA RATED PLEATED MEDIA - The pleated cartridge holds far more surface area than a foam sleeve on its own, so fine sawdust, drywall dust and cement dust are trapped in the media instead of travelling to the motor. Airflow stays open longer and suction holds up through the job.
• 4 FOAM PRE-FILTERS FOR THE HEAVY WORK - Slip a foam sleeve over the cartridge when the debris is coarse, such as wood chips, plaster crumbs and hair, so the heavy material loads onto the foam instead of packing into the pleats. The foam rinses out in seconds, so the cartridge needs washing far less often and lasts longer. Four sleeves means there is always a dry one ready.
• TWO CLEANING BRUSHES INCLUDED - The flat brush sweeps dust out from between the pleat folds, where a rinse alone will not reach. The hooked brush has a small guarded blade in the curve for cutting hair and string wound around the filter, so you can clear a loaded cartridge in a minute instead of washing it every time.
• WASH, REUSE, THEN REPLACE - Knock the loose dust out with the brush first, then rinse the cartridge under running water and let it air dry completely before refitting - a damp filter blocks airflow. No dishwasher. Replace the cartridge when it still looks dirty after washing, when the media is torn, or when suction stays weak on a clean filter. Package: 2 cartridges, 4 foam sleeves, 2 brushes.