Diamond Grinding Head 25x6mm Rounded Bullet Tip 6mm Shank

가격 데이터가 아직 부족해요

이력이 더 쌓이면 정확한 판단을 보여드릴게요.

$18.99 25,521원

9월 20일 기준 아마존 실시간 가격 확인 ↗

해외직접배송 · 관세·배송비 별도

가격 변동

기록 5일

기록된 5일 동안 가격 변동 없음

현재 25,521원

그래프 로딩 중…

아마존 달러 가격을 오늘 환율($1 = ₩1,344)로 환산해 표시합니다. 그날 환율 기준 금액은 그래프를 짚으면 보입니다.

⇄ 다른 상품과 가격 추이 비교

한눈에 요약

Diamond Grinding Head 25x6mm Rounded의 가격은 9월 20일 기준 $18.99(약 25,521원)입니다. 가격 이력이 아직 짧아 역대 최저가와 비교한 판단은 보류합니다. 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗

한국까지 예상 비용

상품가
$18.99 (약 25,521원)
면세 한도
$200 (목록통관) · 이하라 면세 예상
예상 합계
약 25,521원 + 배송비
배송비 넣어 다시 계산해 보기 →
  • 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
  • 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
  • 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
  • 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.

상품 특징

  • Diamond Coating: The grinding head is coated with diamond particles through a brazing process that bonds grit to the steel substrate. Designed for material removal on stone, cast iron, stainless steel, ceramics, glass, jade, and marble.
  • 6mm Round Shank: The 6mm round shank fits standard collets on rotary tools, die grinders, air mills, hand drills, and cordless drills. The cylindrical profile allows secure clamping without slippage at high speeds.
  • Rounded Bullet Tip Geometry: The rounded bullet tip transitions smoothly from a pointed apex to the full 25mm diameter over a 30mm cutting length. Suited for carving contours, blending curves, and smoothing concave surfaces that flat-end bits cannot reach.
  • Workable Materials and Uses: Suitable for gray cast iron, ductile cast iron, stainless steel, hardened steel, ceramics, glass, natural stone, jade, and marble. Applications include grinding, chamfering, contour carving, deburring, and light polishing.
  • Safety and Operating Notes: Secure the bit firmly and run idle for one minute to check for wobble. Wear eye protection, gloves, and work clothing. Apply only axial pressure — never lateral force. For dry grinding, allow intermittent cooling. For wet grinding, use water as coolant and confirm electrical insulation. Disconnect power before bit changes.