ESP32-S3 1.75-Inch Round AMOLED Bare Dev Board, 466 x 466, QSPI

가격 데이터가 아직 부족해요

이력이 더 쌓이면 정확한 판단을 보여드릴게요.

$49.99 67,193원

9월 27일 기준 아마존 실시간 가격 확인 ↗

해외직접배송 · 관세·배송비 별도

가격 변동

기록 2일

기록된 2일 동안 가격 변동 없음

현재 67,193원

그래프 로딩 중…

아마존 달러 가격을 오늘 환율($1 = ₩1,344)로 환산해 표시합니다. 그날 환율 기준 금액은 그래프를 짚으면 보입니다.

⇄ 다른 상품과 가격 추이 비교

한눈에 요약

ESP32-S3 1.75-Inch Round AMOLED Bare의 가격은 9월 27일 기준 $49.99(약 67,193원)입니다. 가격 이력이 아직 짧아 역대 최저가와 비교한 판단은 보류합니다. 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗

한국까지 예상 비용

상품가
$49.99 (약 67,193원)
면세 한도
$200 (목록통관) · 이하라 면세 예상
예상 합계
약 67,193원 + 배송비
배송비 넣어 다시 계산해 보기 →
  • 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
  • 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
  • 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
  • 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.

상품 특징

  • Industrial & Scientific
  • Industrial Electrical
  • Optoelectronic Products
  • Optoelectronic Displays
  • LCD Touch Panels
  • Image Unavailable Image not available forColor:
  • Bare Development Board, No Case or GPS: This product includes an open-PCB ESP32-S3-Touch-AMOLED-1.75 development board and a separate 8 Ohm 2 W speaker. No protective case, finished enclosure, GPS/GNSS module, or GPS antenna is included
  • Round AMOLED Touch Interface: Build compact visual interfaces on a 1.75-inch round capacitive AMOLED display with 466 x 466 resolution, 16.7M colors, and QSPI display communication. Designed for custom dashboards, controls, and embedded display prototypes
  • ESP32-S3 Performance and Memory: The 32-bit LX7 dual-core ESP32-S3 processor runs up to 240 MHz and is paired with 8MB PSRAM and 16MB Flash. Use the board as a hardware base for custom graphics, connected-device logic, and local project assets
  • Motion, Time and Audio Hardware: The board integrates a QMI8658 6-axis IMU, RTC, and dual digital microphone array. The included separate speaker gives developers a hardware option for custom audio-output projects
  • no preconfigured voice assistant or AI service is included
  • Expand, Store and Program: Use the TF-card slot for project storage and the exposed GPIO and UART interfaces for peripheral connection and debugging. The bare board is designed to be integrated into your own enclosure, panel, or prototype using Ar duino IDE or ESP-IDF development workflows