JUUPINE Upgraded Smooth Ice Cream Cold Plate for Bambu Lab P2S X2D X1 X1C P1P P1S A1 3D Printer Build Plate,QR Code Auto-Detection, Smooth Dual-Sided Finish,Glue-Free Adhesion Bambu Build Plate

아마존 달러(USD) 가격을 각 날짜의 환율로 원화 환산해 표시합니다. 현재 환율 $1 = ₩1,410 (2026-08-11 기준)

상품 특징

• 【Energy-Saving Cold Printing Plate】This Bambu Lab cold plate enables energy-efficient printing with minimal bed heat. The SuperTack coating requires a heatbed temperature as low as 45°C for PLA – significantly outperforming traditional build plates that need 65°C. It reduces power consumption and electricity costs while delivering superior results with faster print speeds and less warping
• 【Perfect Compatibility with Built-in QR Code】The ice cream cold plate Custom-made for Bambu Lab X2D, P2S, X1, X1C, A1, P1P and P1S 3D printers. Our Ice Cream cool plate comes with a pre-printed QR code, enabling X2D/P2S/X1/X1C models to auto-recognize matching print parameters. Simply scan the code to load optimized settings for PLA and PETG filaments. Note: For TPU, ABS or ASA printing, manually select &#34
• Textured PEI Plate&#34
• in your slicer software and adjust bed & first-layer temp following ours recommended values
• 【Glue-Free Adhesion – No Mess, No Failures】Features a high-adhesion new technology coated smooth surface that locks models firmly in place during printing. No glue or adhesives needed for PLA and PETG – significantly reduces print failure rates by eliminating adhesion issues. Ideal for beginners and professionals alike. This Bambu Lab P2S build plate makes printing hassle-free
• 【Double-Sided Smooth Surface – Maximum Versatility】Reversible smooth PEI printing platform maximizes value and efficiency. Supports PLA at 35–50°C and TPU at 30–40°C, with compatibility for more filament types than other platforms – including PETG, ABS, ASA at 50–70°C. Use it as your primary P1S build plate or swap between smooth finishes for consistent, professional bottom-layer results on every print.
• 【Effortless Demoulding – Pop Prints Off with Ease】Wait for the cold plate to cool to room temperature before removing your print – simply bend the bed, and the model pops right off. For scraper use, gently lift it from the edges to avoid scratching the smooth coating. This Bambu Lab plate works seamlessly as a Bambu Lab A1 build plate, P2S build plate, or Bambu A1 plate

스펙 정보