2-in-1 Drywall Corner Pole Sander with 5-Section Pole and 15 Sanding Sheets

상품 특징

• Tools & Home Improvement
• Power & Hand Tools
• Image Unavailable Image not available forColor:
• 🏠【Adaptive Inside Corners】This 90° corner drywall sander automatically floats ±7° as wall angles change
• this floating angle cannot be manually set. It fits approx. 83°–97° inside corners, helping both sanding faces maintain contact with adjoining walls so both sides can be sanded in the same pass.
• 🏠【Plastic Head with Wrapped Edges】Sandpaper wraps both side edges of the half-round drywall sanding block, so abrasive—not hard plastic—meets adjoining walls. This drywall inside corner tool helps reduce accidental scratches, gouges, and chipping of joint compound while sanding close to finished surfaces.
• 🏠【5-Section Pole, 25–56 Inch Reach】Add or remove pole sections to set the drywall sanding pole at 25, 35, 46, or 56 inches for high walls, ceiling edges, and wall-to-ceiling corners. Insert the first section with the black plastic sleeve firmly into the sanding head and 𝐜𝐡𝐞𝐜𝐤 𝐭𝐡𝐞 𝐟𝐢𝐭 𝐛𝐞𝐟𝐨𝐫𝐞 𝐨𝐯𝐞𝐫𝐡𝐞𝐚𝐝 𝐮𝐬𝐞. Fully insert the remaining sections, then twist to tighten. 𝐀𝐯𝐨𝐢𝐝 𝐟𝐨𝐫𝐜𝐞𝐟𝐮𝐥 𝐩𝐮𝐥𝐥𝐢𝐧𝐠, 𝐰𝐡𝐢𝐜𝐡 𝐦𝐚𝐲 𝐥𝐨𝐨𝐬𝐞𝐧 𝐭𝐡𝐞 𝐡𝐞𝐚𝐝 𝐜𝐨𝐧𝐧𝐞𝐜𝐭𝐢𝐨𝐧.
• 🏠【Tapered Tip & Wide Coverage】The pointed front reaches narrow 90° corners and tight gaps that standard sanding blocks can miss. The broad half-round faces cover more area per pass along wall-floor joints, baseboard lines, window and door-frame edges, and cabinet or shelf corners.
• 🏠【15 Sheets in 5 Grits】Includes 15 hook-and-loop sanding sheets—3 each of 60/80/180/240/320 grit—for rough removal, joint compound smoothing, paint prep, and fine finishing. The quick-change backing keeps each sheet secure and makes grit changes easier. Please note: Each sheet fully covers the sanding surfaces that contact the walls. Due to the thickness of the sander edges, the portions wrapped over the edges may not fully cover the hook-and-loop area on the back. This is normal and does not affect sanding performance.