2-Pack Steel-Reinforced Epoxy Putty, Multi-Surface Crack/Hole Filler
- 상품가
- $15.99 (약 21,489원)
- 면세 한도
- $200 (목록통관) · 이하라 면세 예상
- 예상 합계
- 약 21,489원 + 배송비
가격 변동
기록 3일
기록된 3일 동안 가격 변동 없음
현재 21,489원
그래프 로딩 중…
아마존 달러 가격을 오늘 환율($1 = ₩1,344)로 환산해 표시합니다. 그날 환율 기준 금액은 그래프를 짚으면 보입니다.
⇄ 다른 상품과 가격 추이 비교한눈에 요약
2-Pack Steel-Reinforced Epoxy Putty의 가격은 9월 11일 기준 $15.99(약 21,489원)입니다. 가격 이력이 아직 짧아 역대 최저가와 비교한 판단은 보류합니다. 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗
한국까지 예상 비용
- 상품가
- $15.99 (약 21,489원)
- 면세 한도
- $200 (목록통관) · 이하라 면세 예상
- 예상 합계
- 약 21,489원 + 배송비
- 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
- 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
- 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
- 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.
상품 특징
- Industrial & Scientific
- Adhesives, Sealants & Lubricants
- Epoxy Adhesives
- Metal Filled Epoxies
- Reliable delivery option, and
- Seller who offers good customer service
- Image Unavailable Image not available forColor:
- Two-Part Epoxy Putty Set: This repair kit contains two packs of steel reinforced epoxy putty that only requires hand kneading prior to use for daily surface repair and maintenance.
- Includes Gloves and Scraper Tools: The set comes with gloves and a scraper tool to assist in mixing and applying the putty. These accessories support cleaner handling and more controlled application during use.
- Crack and Surface Filling: Designed for filling cracks, holes, gaps, and damage. It helps restore uneven areas on repaired items and supports basic surface restoration.
- Multi-Surface Application: Suitable for use on metal, wood, ceramic, stone, tile, and selected plastic surfaces. It can be used for general repair tasks in home, garage, and workshop environments.
- Pipe and Structural Repair Use: Ideal for repairing metal pipes, railings, frames, and similar structures. The material can be shaped to fit irregular or damaged areas during maintenance work.
- #150,859 in Industrial & Scientific (See Top 100 in Industrial & Scientific)
- #164 in Metal Filled Epoxies
- typically one is the epoxy proper and the other the hardener), knead it together for about three minutes and then form it to match whatever you are trying to join. Press the pieces together, secure your joint for the curing process and wait for it to cure.In our case, we were joining two pieces of stainless steel pipe at a 90 degree angle (each piece cut at 45 degrees).After cleaning the cut ends of the pipes, we simply rolled out the putty into a thick line, placed it directly over the cut joints, and pressed the joints together. Just a word of advice, you want to wear the gloves provided with the epoxy because it’s not easy to get off your skin if allowed to start the drying process. After application, the joint was held in place with a combination of clamps and bungee cords to give the epoxy 24 hours to cure completely.And cure it did! The bond formed was air / water tight (we pressurized the pipe with both up to 60psi and the