0.6cm(0.25인치) 엔드 밀 비트 카바이드 스퀘어 4 플루트 틴 0.6cm(0.25인치) 섕크 2개

상품 특징

• Industrial & Scientific
• Milling Accessories
• Image Unavailable Image not available forColor:
• 1/8 in See available options
• 3/8 in See available options
• 3/16 in See available options
• 3/32 in See available options
• 5/16 in See available options
• SOLID CARBIDE STAYS SHARP: Each bit is ground from tungsten carbide, so edges hold up through long runs in aluminum and mild steel instead of dulling like high speed steel tooling. Keep feed steady and let the cutter work.
• CUTS ALUMINUM, STEEL AND HARDWOOD: Four flute geometry clears chips fast in aluminum and leaves a clean wall finish in mild steel and hardwood. Run it in a rigid holder for best results.
• READ BEFORE FIRST CUT: Carbide is very hard but not flexible. Avoid side loading and deep plunge cuts taken in a single pass, since that is how these cutters chip or snap. Take lighter passes and you will get long service.
• CHECK YOUR COLLET FIRST: Most of the cutters have matching head and shank diameters, while two of them step down to a narrower shank so they still fit a common collet. Measure your holder and check the size chart in the images before ordering.
• MULTIPLE SIZES IN ONE CASE: The set covers a wide spread of cutter diameters, and several sizes come in more than one piece so you can keep a spare loaded. Store them in the case so edges stay protected between jobs.