DIN Rail Gigabit PoE Surge Protector, RJ45 Ethernet Lightning Protection for IP Cameras, PoE Switches, NVRs, Outdoor Cat5e/Cat6 Runs, 10/100/1000Mbps, PE Ground, in/Out, Stable Signal, LAN Protector
역대 최저
약 56,320원
$38.09
2026-06-19
역대 최고
약 57,510원
$38.90
2026-07-06
평균가
약 57,151원
$38.65
달러 가격을 현재 환율 $1 = ₩1,478 (2026-07-23 기준)로 환산한 원화입니다.
가격 변동 그래프
아마존 달러(USD) 가격을 각 날짜의 환율로 원화 환산해 표시합니다. 현재 환율 $1 = ₩1,478 (2026-07-23 기준)
그래프 로딩 중…
쿠팡에서 더 저렴한 가격을 찾아보세요
쿠팡에서 "DIN Rail Gigabit PoE Surge Protector" 검색이 포스팅은 쿠팡 파트너스 활동의 일환으로, 이에 따른 일정액의 수수료를 제공받습니다.
상품 특징
- Gigabit PoE Surge Protection for Network Lines – Protects RJ45 Ethernet and PoE connections used with IP cameras, PoE switches, NVRs, routers, modems, servers, and other surveillance or network equipment. Designed for 10/100/1000Mbps Gigabit Ethernet and 48V PoE line protection.
- Helps Protect Outdoor Camera & Ethernet Runs – Install in-line between the exposed cable side and your protected equipment to help reduce damage from lightning-induced surges, transient voltage, and outdoor network cable surge events. Ideal for CCTV systems, IP camera installations, building entry points, and network cabinets.
- 0kV Lightning Protection, 5kA Max Discharge – Built for serious Ethernet surge protection with 10kV lightning protection rating, 2.5kA nominal discharge current, 5kA maximum discharge current, and over 2000 surge events at 0.5kA
- Stable Gigabit Signal with Low Insertion Loss – Supports 250MHz bandwidth and up to 1000Mbps transmission with ≤0.2dB insertion loss, helping maintain stable data and PoE transmission while adding surge protection to the line. Compatible with Cat5e, Cat6, and standard RJ45 Ethernet cabling.
- DIN-Rail Mount with Clear IN / OUT Direction – Compact DIN-rail design fits neatly into industrial control panels, security cabinets, equipment racks, and low-voltage enclosures. Connect the surge-entry cable side to IN, connect the protected switch/NVR/device side to OUT, then connect PE ground.
- PE Grounding Required for Proper Protection – The PE terminal must be connected to a reliable grounding system for effective surge discharge. Manual recommends a short, thick, straight grounding path; grounding resistance should be as low as possible, with ≤4Ω given as a reference value for better lightning protection effect.