PCB0046 Serial Wombat HSD SW8B I2C Controlled 8 Channel High Side Driver Board (1)

아마존 달러(USD) 가격을 각 날짜의 환율로 원화 환산해 표시합니다. 현재 환율 $1 = ₩1,480 (2026-07-23 기준)

상품 특징

• 8 efficient High Side Outputs over I2C. Digital Output or configurable frequency PWM. Ideal for relays, solenoids, lamps, fans, motors, automotive loads, and other switched devices. 160 mOhm typical per-channel resistance when on.
• Built-In current feedback and diagnostics over I2C - Monitor current draw on each output channel and detect fault conditions directly from software. Current feedback and diagnostic reporting help your application understand load behavior and react intelligently.
• Current Limiting - On board thermal limiting activates if average per-IC current exceeds 2.5 A . Fault reaction can either automatically restart current when the driver chip drops below the thermal limit, or remain latched off until the host changes the input (solder jumper configurable)
• Inrush Limiting - On driver PWM limits inrush current. This can be helpful for improving stability in systems that drive large inductive loads such as motors.
• On board PWM generation using Serial Wombat firmware. Each channel can have a different PWM duty cycle and frequency. This allows flexibility in driving inductive loads that is not avaialble through normal Arduino functions.
• On board monitoring of load and logic input voltages. These values can be read over I2C. Optional logic and load power indicator LEDs can be enabled via solder jumper
• 3.3 or 5V logic operation. 3.7 V to 24V load drive voltage.
• Flexible I2C configuration. I2C address can be set with solder jumpers to range from 0x60 to 0x6F . Optional header pins allow flexible configuration using header jumpers. On board solder jumpers can add 2200 ohm pull up I2C bus resistors.
• Arduino, Python / MicroPython / CircuitPython and C# libraries are available. Extenstive examples and online tutorials. Firmware is open source .