2026 SuedeCryo Ultra Cool Build Plate 276x293mm Compatible with Snapmaker U1 3D Printer, 0.8mm Double-Sided Low-Temp Print Bed – PLA at Room Temp, PETG and ABS No Warp No Glue, Removable Platform

아마존 달러(USD) 가격을 각 날짜의 환율로 원화 환산해 표시합니다. 현재 환율 $1 = ₩1,463 (2026-07-25 기준)

상품 특징

• 1.【Stop putting up with 0.5mm thin plates that warp and fail in months】： Ordinary cold plates are only 0.4-0.5mm with 2-3 thin coatings – they warp, leave residues, and die fast. SuedeCryo ULTRA stacks 9 precision layers to reach 0.8mm total thickness – nearly double the material! 50% higher flex life, 50% longer lifespan. You pay for one plate and get years of reliable printing. 30‑day returns – not satisfied? Send it back. We dare you to compare.
• 2.【PLA at room temperature, PETG 10°C lower, ABS without glue – other plates can't match】： PLA—Others need 30-50°C heated bed. You print at room temperature (20-25°C) – no bed heating, 100% energy saving. The money you save on electricity buys five spools a year. PETG— Others 50-70°C → ours 40-60°C – 10°C cooler, safer, less warping. ABS—Others warp, require glue and an enclosure. Our velvet surface holds ABS firmly at 70-90°C – no warping, no glue. Most cold plates can't handle ABS at all. We do it effortlessly. Max bed temp 90°C. Not for PC/nylon/TPU (those need a different plate).
• 3.【After a few prints other plates are stained with glue rings, yellowing, orange peel – ours stays clean】： Ordinary plates become ugly quickly. SuedeCryo ULTRA's velvet surface reduces residue by 80% – even after dozens of prints the plate looks like new. Bottom surface flatness is improved by 20%, giving your models a fine leather-like grain that needs no sanding. Cleaning? A damp cloth or mild dish soap – no alcohol allowed. That's it.
• 4.【 Still scraping your prints with a metal scraper? We just cool, bend, and pop】： After printing, let the plate cool to room temperature, then gently bend it – the model pops right off. No scraper, no damage, no risk. In the rare case a print sticks too firmly, put the plate in the freezer for 10 minutes, then bend – it releases easily. The 0.8mm thick spring steel core withstands thousands of flex cycles without deformation.
• 5.【 Perfect fit for Snapmaker U1 – 30-day trial】： Size: 276x293mm – compatible with Snapmaker U1. How to use: ① Place plate on heated bed (magnetic sticker required). ② Select “Cool Plate” mode. ③ Level bed – nozzle at one A4 paper thickness (too low = permanent scratch – not a defect). ④ Set temp: PLA room temp / PETG 40-60°C / ABS 70-90°C. ⑤ Print → Cool → Bend → Pop. ⑥ Clean with mild dish soap, rinse and dry. No alcohol. After-sales: 30-day returns, 24/7 customer support.