2026 SuedeCryo Ultra Cool Build Plate 235x235mm for Adventurer 5M Pro/5X/5M/Ender 3 V3/S1 Pro/Kobra 2 Pro/Neptune 3 Pro/4, 0.8mm Double-Sided – Support PLA at Room-Temp,PETG,ABS Removable Print Bed

아마존 달러(USD) 가격을 각 날짜의 환율로 원화 환산해 표시합니다. 현재 환율 $1 = ₩1,449 (2026-07-31 기준)

상품 특징

• 1.【Stop putting up with 0.5mm thin plates that warp and fail in months】： Ordinary cold plates are only 0.4-0.5mm with 2-3 thin coatings – they warp, leave residues, and die fast. SuedeCryo ULTRA stacks 9 precision layers to reach 0.8mm total thickness – nearly double the material! 50% higher flex life, 50% longer lifespan. You pay for one plate and get years of reliable printing. 330‑day returns – not satisfied? Send it back. We dare you to compare.
• 2.【PLA at room temperature, PETG 10°C lower, ABS without glue – other plates can't match】： PLA—Others need 30-50°C heated bed. You print at room temperature (20-25°C) – no bed heating, 100% energy saving. The money you save on electricity buys five spools a year. PETG— Others 50-70°C → ours 40-60°C – 10°C cooler, safer, less warping. ABS—Others warp, require glue and an enclosure. Our velvet surface holds ABS firmly at 70-90°C – no warping, no glue. Most cold plates can't handle ABS at all. We do it effortlessly. Max bed temp 90°C. Not for PC/nylon/TPU (those need a different plate).
• 3.【After a few prints other plates are stained with glue rings, yellowing, orange peel – ours stays clean】： Ordinary plates become ugly quickly. SuedeCryo ULTRA's velvet surface reduces residue by 80% – even after dozens of prints the plate looks like new. Bottom surface flatness is improved by 20%, giving your models a fine leather-like grain that needs no sanding. Cleaning? A damp cloth or mild dish soap – no alcohol allowed. That's it.
• 4.【 Still scraping your prints with a metal scraper? We just cool, bend, and pop】： After printing, let the plate cool to room temperature, then gently bend it – the model pops right off. No scraper, no damage, no risk. In the rare case a print sticks too firmly, put the plate in the freezer for 10 minutes, then bend – it releases easily. The 0.8mm thick spring steel core withstands thousands of flex cycles without deformation.
• 5.【Perfect fit for popular 235x235mm printers – 5 easy steps, 30‑day returns】： Size: 235x235mm – compatible with Creality Ender 3 V3 SE/3 V3/3 V2/3 S1 Pro/3 V2 Neo/3 Pro,Ender 5 Pro, Adventurer 5M Pro/5X, Kobra 2 Pro, Neptune 3 Pro/4, Sovol and other 235x235mm printers. How to use: ① Place plate on heated bed (magnetic – no sticker needed for most). ② Select “Cold Plate” mode. ③ Level bed – nozzle at A4 paper thickness (too low = permanent scratch – not a defect). ④ Set temperature: PLA room temp / PETG 40-60°C / ABS 70-90°C. ⑤ Print → Cool → Bend → Pop. ⑥ Clean with mild dish soap + soft cloth, rinse and dry. No alcohol. After‑sales: 30‑day returns, 24/7 support.

스펙 정보