LUXTRKSTO 2 Sets 3500lbs Trailer 5 on 4.5'' Hub Kits with 2pcs 1-1/16'' to 1-3/8'' Round #84 Tapered Spindles, Prelubricated L44649 L68149 Bearings 5 Lug Bolt 3.5K pounds 5x4.5 Trailers Idler Hub Set

아마존 달러(USD) 가격을 각 날짜의 환율로 원화 환산해 표시합니다. 현재 환율 $1 = ₩1,475 (2026-07-24 기준)

상품 특징

• 【FIT & SIZE】- 5x4.5'' idle hub kits for 3500 lbs trailer axles. #84 Round Spindle (1.75'' Diameter at Biggest end, Overall Length: 7.88''), Dust Cap (O.D: 1.98''), L44649 Outer Bearings (I.D: 1-1/16''), L68149 Inner Bearings (I.D: 1-3/8''), Grease Seals (2.56" O.D - 1.72" I.D), Lug Nuts (1/2''-20 thread). Please check the size information and compatibility carefully before placing an order. Professional installation is recommended.
• 【PRE LUBRICATION】- The bearings and grease seals are pre-assembled and lubricated with grease. After receiving the products, you can install them immediately. Easy to replace and repair on the road.
• 【FULL SET OF PARTS】- You will receive 2 sets of 3500 lbs 5x4.5'' trailer hubs, #84 spindles and all the hardware parts you will need, you don't have to go anywhere else to buy parts, saving your time and money. This is the value-for-money kit.
• 【HEAVY DUTY & ANTI-RUST】- These items are made of high quality steel and rubber, strong and durable. Wheel hub surface with black coating, and dust cap surface zinc-plated, anti-corrosion & anti-rust. The bearings have high precision, low friction and low noise. Value for money, long-term service for your trailer.
• 【STURDY PACKAGING】- The trailer hubs are wrapped with bubble bags. The bearings and grease seals have been pre assembled on the hubs. Other installation hardware are wrapped in white bubble bags. All parts are neatly placed in a sturdy cardboard box. The products are protected as much as possible during transportation to prevent deformation and wear
• 【BOLT PATTERN】- 5 on 4.5'' (5x4.5) bolt pattern, 1/2''-20 studs and bearing races are pre-installed on the hubs.
• 【NOTE】- In order to install firmly, the axle dust cap is slightly larger by design. You need to knock it into place using a wood block and hammer or rubber mallet, to prevent denting the cap while installing.