SWANSOFT Electric Strapping Tool Replacement Kits – Tension Pulley, Bottom Plate & Cutter (Compatible with SST-320/SST-250 Only)

아마존 달러(USD) 가격을 각 날짜의 환율로 원화 환산해 표시합니다. 현재 환율 $1 = ₩1,467 (2026-07-28 기준)

상품 특징

• Worn Parts Replacement Kit: If your electric strapping tool starts skipping tension, slipping on the strap, or leaving partial cuts, the internal wear parts have reached their limit. These symptoms do not mean the machine is broken – they simply indicate the tension pulley, bottom plate, or cutter needs replacement. This kit directly addresses those failure points. Swap the worn components, and the tool will return to normal strapping behavior immediately.
• Designed Specifically for SST-320&SST-250: Not all replacement parts fit the same. This kit contains components manufactured to factory specifications for the SST-320&SST-250 model. The tension pulley teeth, bottom plate contour, and cutter angle match the original design tolerances. Universal or off-brand parts often cause jamming, uneven wear, or poor strap feeding. These parts are made to fit correctly the first time.
• Gain Immediate Efficiency Gains: A strapping tool with worn tension and cutting components forces operators to work slower: re-tensioning straps, re-cutting ends, or clearing jams. Installing this replacement kit (tension pulley, bottom plate, cutter) removes those friction points. The tool grips on the first pull, cuts cleanly on the first stroke, and moves to the next strap without delay. That translates directly into more packages strapped per hour with less operator fatigue.
• Normal Consumables: These three parts are classified as consumables, not permanent components. Every SST-320&SST-250 will need them replaced periodically based on usage volume. This kit allows you to treat these parts as the routine service items they are – replace them, and the machine keeps working like new.
• Protects the Entire SST-320&SST-250: Worn consumables do not just reduce performance – they strain other components. A dull cutter forces the motor to work harder. A smooth tension pulley increases cycle time and heat buildup. A worn bottom plate misaligns strap feed. Replacing the tension pulley, bottom plate, and cutter on a regular schedule prevents this secondary wear. The result: longer overall machine life, fewer major repairs, and lower total ownership cost for your SST-320&SST-250.

스펙 정보