24V 5-Pin Heater Blower Motor Relay, Automotive Plug-in Power Relay for Relay/Fuse Box, OE#156700-1651 Replacement, Voltage/Pin Match Required, Confirm Fitment by OE Number

아마존 달러(USD) 가격을 각 날짜의 환율로 원화 환산해 표시합니다. 현재 환율 $1 = ₩1,478 (2026-07-24 기준)

상품 특징

• Specs & value: 24V automotive plug-in power relay, 5 terminals (5-pin; verify your original pin layout/footprint before ordering). OE reference: 156700-1651. Built for stable switching in 24V electrical systems used on some commercial trucks/vans. Common relay/fuse box applications may include heater/HVAC blower circuits, lighting (headlamp), and other accessory loads—actual function depends on the slot and wiring. Match by markings on your old relay: voltage (24V), terminal diagram, and any current rating printed on the case. If your original relay shows a diode/resistor suppression symbol, match the same suppression type to avoid electrical issues.
• Install / replacement tips: disconnect the negative battery cable before servicing relays. Locate the relay/fuse box and confirm the correct slot by OE number and the vehicle manual/parts diagram (location varies by vehicle). Pull the old relay straight up, compare the printed OE# and terminal diagram, then press the new relay fully into the socket—do not force if it will not seat smoothly. Inspect the socket for heat damage/corrosion and make sure terminals are tight. After installation, verify circuit operation. If symptoms remain, also check related fuses, switches, wiring, and the load component—relay replacement may not be the only cause.
• Compatible with 2003 Toyota Dyna / Toyoace Heater Blower Motor Relay. Fitment note: use the OE number printed on your original relay and your vehicle manual/parts diagram—this item is identified by OE#156700-1651 and cross-reference 90987-04007; replace only when both the OE number and 24V 5-pin footprint match.
• Buyer checklist for relay orders: 1) match the printed OE# (156700-1651 or 90987-04007), 2) confirm system voltage is 24V, 3) confirm 5-terminal layout and socket orientation, 4) verify the relay controls the heater/HVAC blower circuit on your vehicle. Common relay-related symptoms can include blower not turning on, intermittent fan speed changes, or blower staying on after key-off; these can also be caused by fuses, resistor packs, switches, wiring, or blower motor issues—confirm diagnosis before replacing parts.

스펙 정보