JSS48A-S Cycle Time Delay Timer Relay, AC/DC 24-48V Industrial Control, 8-Pin Plug-in, SPDT Contact, Reset/Pause Terminals

아마존 달러(USD) 가격을 각 날짜의 환율로 원화 환산해 표시합니다. 현재 환율 $1 = ₩1,449 (2026-07-31 기준)

상품 특징

• Specs: Model/OE# JSS48A-S cycle delay timer relay (T1/T2). Control supply: AC/DC 24-48V (operates within 85%-110% of rated). Time ranges selectable: 0.1-9.9s, 1-99s, 0.1-9.9min, 1-99min, 0.1-9.9h, 1-99h. 8-pin plug-in; 1C (SPDT) output (1NO+1NC) with reset & pause terminals. Ratings: Ui 380VAC, Uimp 2.5kV; contact AC250V 3A (resistive), Ith 5A; setting/repeat error <=1%.
• Install/replace: Power OFF before wiring. Confirm supply is AC/DC 24-48V and verify the 8-pin socket/pinout and your circuit diagram before plugging in; align pins to prevent short circuits. In cycle delay mode, set T1 (ON) and T2 (OFF) using the dials, then energize. Use reset/pause terminals for control; to reduce interference, consider shielded wire on the reset line. If your load exceeds rated contact capacity, use an intermediate relay/contactor. Typical installation: control cabinet/panel; environment -5 to 40C, altitude <=2000m; avoid heavy vibration, corrosive gas, conductive dust, rain/snow.
• Compatible with 24-48V Industrial Machinery Control Panel 8-Pin Socket Relay; Compatible with 24-48V Automation System Control Cabinet 8-Pin Socket Relay; Compatible with 24-48V Power Control Panel Switchboard 8-Pin Socket Relay; Compatible with 24-48V Control Circuit Equipment Panel Mount Relay; Compatible with 24-48V Control Cabinet Cycle Delay Timer Relay
• Complementary items: 8-pin relay socket/base or panel cutout/mounting clamp; control-circuit protection (fuse/breaker) per your design; intermediate relay/contactor for higher or inductive loads. Maintenance tip: keep a spare timer relay in the same cabinet section for quick swap during troubleshooting. Safety: do not install or disassemble while energized.

스펙 정보