RT425024 24VDC PCB Power Relay, DPDT (2 Form C) 8A, 8-Pin Through-Hole PC Pin, Replacement Control Board Relay, OE RT425024 / 8-1393243-5

아마존 달러(USD) 가격을 각 날짜의 환율로 원화 환산해 표시합니다. 현재 환율 $1 = ₩1,467 (2026-07-28 기준)

상품 특징

• Specs: 24VDC coil (approx. 1.44 kOhm / 0.4 W), DPDT (2 Form C) contacts, 8A contact rating, 8-pin power PCB relay with through-hole PC pins; non-latching (monostable). Max switching up to 400VAC (per spec) for approved designs. OE/PN: RT425024; also referenced as 8-1393243-5. Use for board-level replacement in 24V control modules to switch two independent circuits (NO/NC changeover) for signals or moderate loads within rating (e.g., solenoids, small motors, lamps - when the original design specifies it). Package includes relay only (no socket, no wiring).
• Install tips: Disconnect power and confirm the coil supply is 24VDC before replacement. This is a PCB through-hole relay (not a plug-in blade relay), so service typically requires desoldering/soldering on the circuit board. Match the 8-pin DPDT pinout and footprint (RT2 5mm pinning), and inspect for lifted pads or cracked joints. After install, apply 24VDC to the coil and verify NO/NC changeover on both poles. Common location: inside a control module/relay board/PCB assembly rather than a vehicle fuse box. Note: RT425024 is often listed without a built-in coil suppression diode - follow your board design.
• Compatibility (verified by part number): Compatible with any 24VDC PCB/control board that specifies OE RT425024 (aka 8-1393243-5) relay in its parts list, schematic, or board printing. Because RT425024 is a board-mount component used across many devices, vehicle year/make/model fitment tables are often not published - confirm fitment by OE number, footprint, and pinout before purchase. Keywords: 24V DPDT 2FormC 8A 8-pin PCB relay, RT2 footprint, control board relay replacement.
• Use cases & search coverage: Compatible with 24VDC electrical systems that need a DPDT (changeover) power relay on a PCB - switching two independent circuits for control logic, interlocks, signal routing, or moderate loads within rating. Often used in 24V commercial equipment and vehicle-adjacent electronics (fleet accessories, liftgate controllers, charging systems, HVAC/lighting control boards) where the design calls for an RT425024-style relay. If your board uses a different coil voltage (12V/48V) or different contact form, do not substitute.
• Troubleshooting & related parts: A worn relay may cause intermittent operation, no audible click at 24V coil input, contacts that stick, or heat/discoloration on the PCB. Replace the relay when diagnostics confirm the board-level relay is the failure point. Related/complimentary items for service setups: DIN-rail relay socket RT78724 (also listed as 8-1415035-1) can be used in test rigs or relay packages when you need a socketed mount - sold separately and not required for PCB installation. Always confirm pin layout and terminal style for your application.

스펙 정보