SecosAutoparts 722.6 NAG1 W5A580 Transmission Valve Body for Charger 05-16
- 상품가
- $235.00 (약 313,609원)
- 면세 한도
- $200 (목록통관) · 초과라 전액 과세
- 예상 관세
- 25,089원 (일반 공산품 8%)
- 예상 부가세
- 33,870원 (10%)
- 예상 합계
- 약 372,568원 + 배송비
가격 변동
가격 추적을 막 시작했어요
하루에 한 번 가격을 기록합니다. 기록이 이틀 이상 쌓이면 여기에 가격 변동 그래프가 그려져요.
한눈에 요약
SecosAutoparts 722.6 NAG1 W5A580의 가격은 9월 17일 02:08 기준 $235.00(약 313,609원)입니다. 가격 이력이 아직 짧아 역대 최저가와 비교한 판단은 보류합니다. 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗
한국까지 예상 비용
- 상품가
- $235.00 (약 313,609원)
- 면세 한도
- $200 (목록통관) · 초과라 전액 과세
- 예상 관세
- 25,089원 (일반 공산품 8%)
- 예상 부가세
- 33,870원 (10%)
- 예상 합계
- 약 372,568원 + 배송비
- 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
- 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
- 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
- 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.
상품 특징
- Replacement Parts
- Transmission & Drive Train
- Transmissions & Parts
- Valve Body Kits
- Image Unavailable Image not available forColor:
- Fits 722.6 / NAG1 / W5A580 5-Speed Automatic Transmission: Fit for Chrysler 300/300C (2004-2014)
- Fit for Dodge Charger (2005-2016), Challenger (2008-2014), Magnum (2004-2008), Durango (2010-2012), Nitro (2007-2011), Sprinter (2003-2010)
- Fit for Jeep Grand Cherokee (2002-2016), Wrangler JK (2011-2016), Commander (2005-2010), Liberty (2008-2012)
- Fit for Chrysler Crossfire (2004-2008), Fit for Jaguar XJ8/XJR/XK8 (1998-2003), Fit for Porsche 911 (2000-2009), Fit for VW Crafter (2006-2016), Fit for SsangYong Rexton (2001-2016). ⚠️ This valve body is for the 722.6 (also known as NAG1 or W5A580) 5-speed automatic ONLY — verify your transmission type before ordering.
- Manufacturer Part Number: 2112770101, 1402700561, 1402700161, 1402700761, 1402701261
- 52108213AB, 52108308AC, 68021352AA
- 917-678. Also cross-references: A2112770101, A1402700561. This is a COMPLETE valve body assembly with conductor plate (TCU/transmission control unit circuit board) pre-installed — ready for installation.
- Complete Valve Body Assembly with Conductor Plate Pre-Installed: The conductor plate contains the transmission's internal speed sensors and electrical connections that communicate shift commands from the TCM (Transmission Control Module) to the solenoids in the valve body. IMPORTANT: The 722.6 transmission has multiple conductor plate versions — please verify your existing conductor plate connector type matches before ordering. Compare the electrical connector shape and pin count on your current unit.
- Common 722.6 NAG1 Valve Body / Conductor Plate Failure Symptoms: (1) Harsh or delayed shifting between gears. (2) Transmission stuck in "limp mode" (locked in 2nd or 3rd gear). (3) Erratic shifting — skipping gears or hunting between gears. (4) "Check Engine" light with transmission-related DTCs (P0700, P0715, P0720, P0730-P0736). (5) No reverse gear or delayed reverse engagement. (6) Transmission slipping under load. (7) Flare-up between shifts (RPM spikes during gear change). (8) Vehicle won't shift out of Park. (9) Speed sensor codes.
- Professional Installation Required — Transmission Adaptation Reset Needed After Install: This is an internal transmission component — installation requires dropping the transmission oil pan, removing the old valve body, and installing the new unit. Estimated time: 3-5 hours. ⚠️ AFTER INSTALLATION: (1) Fill with correct ATF fluid (MB 236.14 specification or equivalent). (2) Perform transmission adaptation reset using a compatible scan tool. (3) Allow the transmission to complete its re-learning process. (4) Re-check fluid level at operating temperature.