10PCS NY5W-K 5V Power Relay, SPST-NO 1 Form A, 5A 250VAC/30VDC, 4-Pin SIP PCB, 20.1×5×17.5 mm, Low-Power 120 mW Coil 208 Ω, Compatible with NY-5W-K-IE Footprint (NY Series)

아마존 달러(USD) 가격을 각 날짜의 환율로 원화 환산해 표시합니다. 현재 환율 $1 = ₩1,467 (2026-07-28 기준)

상품 특징

• Parameters & cross-reference: 5 VDC coil (208 Ω), low power 120 mW nominal/≈54 mW operate; SPST-NO (1 Form A) contacts rated 5 A; switching up to 270 VAC or 125 VDC; ultra-slim 5.0 mm body (approx. 20.1×5×17.5 mm); sealed RTIII. Cross reference (footprint/marking): Compatible with NY-5W-K-IE; footprint compatible with NY12W-K (12 V) and NY24W-K (24 V) of the same NY series—verify required coil voltage before ordering
• Installation & location: through-hole PCB relay with SIL pitch terminals (7.62 mm); mount on printed circuit boards inside control modules or devices, not in blade/ISO automotive sockets. Observe pin orientation per board silkscreen; dielectric strength 3,000 VAC (coil-to-contacts) with 5,080 V surge; UL/CSA recognized. Typical use is board-level switching; select by footprint, coil voltage and contact form rather than by vehicle year/model.
• Compatibility scope (footprint): Compatible with boards specifying the NY series slim relay footprint or the solid-state I/O module type “SN” size/pin arrangement noted in the datasheet; replaces relays marked “NY5W-K/NY-5W-K/NY5WK” when the coil is 5 V and contact form is 1 A (SPST-NO). This is not vehicle-specific; do not select by car make/model—match the board’s relay code, footprint and coil voltage.
• Performance & durability: contact material AgNi with gold overlay/plating; initial contact resistance ≤30 mΩ; operate time ≈10 ms, release time ≈5 ms; mechanical life ≈2 × 10⁶ ops; electrical life ≈1 × 10⁵ ops (resistive load); max switching power ≈750 VA/90 W; operating temperature −40 °C to +90 °C. Dimensions (approx.) 20.1×5×17.5 mm enable high-density layouts.
• Complements board repairs & multi-voltage designs: Compatible with NY12W-K (12 V) and NY24W-K (24 V) versions for the same footprint when different coil voltages are required on related circuits. For motor loads, note 1/8 HP rating at 125/250 VAC and 5 A resistive; always confirm load type and derate accordingly. Not a plug-in cube relay; no harness or socket is included

스펙 정보