RATTMMOTOR 1500W 110V Permanent Magnet DC Brushless Servo Motor 200-5000RPM
- 상품가
- $215.00 (약 286,919원)
- 면세 한도
- $200 (목록통관) · 초과라 전액 과세
- 예상 관세
- 22,954원 (일반 공산품 8%)
- 예상 부가세
- 30,987원 (10%)
- 예상 합계
- 약 340,860원 + 배송비
120V 전용 · 변압기 필요
미국 전용(110V) 제품이에요. 한국(220V)에서 쓰려면 강압 변압기(다운트랜스)가 필요해요.
플러그는 미국형(A타입)이라 돼지코(변환 어댑터)가 필요해요.
- 브랜드
- RATTMMOTOR
- Speed
- 5000 rpm
- 전압
- 110 volts
- Horsepower
- 1500 watts
가격 변동
기록 2일
기록된 2일 동안 가격 변동 없음
현재 286,919원
그래프 로딩 중…
아마존 달러 가격을 오늘 환율($1 = ₩1,335)로 환산해 표시합니다. 그날 환율 기준 금액은 그래프를 짚으면 보입니다.
⇄ 다른 상품과 가격 추이 비교한눈에 요약
RATTMMOTOR 1500W 110V Permanent Magnet의 가격은 10월 8일 기준 $215.00(약 286,919원)입니다. 가격 이력이 아직 짧아 역대 최저가와 비교한 판단은 보류합니다. 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗
한국까지 예상 비용
- 상품가
- $215.00 (약 286,919원)
- 면세 한도
- $200 (목록통관) · 초과라 전액 과세
- 예상 관세
- 22,954원 (일반 공산품 8%)
- 예상 부가세
- 30,987원 (10%)
- 예상 합계
- 약 340,860원 + 배송비
- 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
- 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
- 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
- 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.
상품 특징
- Tools & Home Improvement
- Electric Motors
- Permanent Magnet Motors
- Image Unavailable Image not available forColor:
- ✅【Motor Parameters】Power range: 1500w
- Motor pole pairs: 8 pairs
- Input frequency: 50-60hz
- Motor category: permanent magnet brushless servo motor
- Insulation class: F class
- Speed range: 200-5000 rpm
- Control method: turn on the power, adjust the speed with the knob
- Protection mode: overcurrent, overvoltage, short circuit protection, locked rotor protection.
- ✅【Motor Size】Rated voltage: DC 110V 50-60Hz
- Rated torque: 5.02Nm
- Installation size: 69mm
- Out shaft length: 27+15mm
- Mounting thread: M6 through hole
- Key slot: 5*5*20mm
- Shaft diameter: 15mm
- The motor is 15mm threaded shaft, can be assembled with synchronous belt pulley, triangular belt pulley, support the addition of ER special collet.
- ✅【Simple Introductions】Brushless servo control system, support a key forward and reverse, support for remote control, boot real-time display speed, that is, start and stop, can also be soft start (start slowly, stop also slow and) frequent forward and reverse start, according to the need to set the speed, knob speed start and stop, switch speed start and stop, analog start and stop speed, PLC-485 standard communication interface, the motor for the 15mm threaded shaft, can be assembled with synchronous pulley, triangular belt wheel, support for the installation of ER special chuck. Triangle pulley, support the installation of ER special collet.
- ✅【Features】Pure copper motor, strong power and efficient heat dissipation
- Strong anti-interference ability, low noise, with multiple protections such as overcurrent, overload and overvoltage
- Adopt advanced heat dissipation design process, lower temperature rise
- built-in filter, strong anti-interference ability.
- ✅【Wide Applications】Widely used in belt sander, polishing machine medical equipment, small lathes, milling machines, automation equipment and robots to provide power control system. This industrial control system is fully enclosed does not enter the dust does not enter the foreign body, support foot pedal open control, stepless speed regulation, really suitable for DIY fans a modified power machine.