Epindon Replacement Module Compatible with Victrix Pro BFG Controllers | Tactile Switch | Conductive Rubber is NOT Required | Both PS5 & Xbox Version | Right Stick | FPS Tension 170G

아마존 달러(USD) 가격을 각 날짜의 환율로 원화 환산해 표시합니다. 현재 환율 $1 = ₩1,463 (2026-07-26 기준)

상품 특징

• A hand-made stick personalized module compatible with Victrix Pro BFG controller by Epidnon, and a t2.0 screwdriver was included.
• The customized module increases the tension of right stick (about 170G), the tactile switch is easy to press and feels good to press. In particular, it has a shorter response time, which is an essential feature for FPS professional gamers. it is ideal for the aiming of FPS /TPS games such as Call of Duty, Apex Legends, Fortnite, ect.
• Improve module issues such as drift by replacing existing module on the R stick.
• Easily installation. Unscrew the screws of faceplate and stick module PCB board with attached T2.0 driver; Replace the stock module with Epindon FPS module.【Attention : 】please insert and remove connector pins of left stick module slowly.
• Calibration is requested when the left stick was installed. Calibration method: Press the L( R )stick and function button at the same time, the function button LED will flash. At that time, turn the L(/ R) stick left (counterclockwise) and right (clockwise) 3 times each. Then press the function button again, the white LED will turns off to complete the module Calibration.【TIPS:】Place the controller on a flat, horizontal direction to ensure accurate calibration. it may be necessary to recalibrate for several times.
• 【TIPS】: Always place the VICTRIX PRO BFG controller on a flat, level surface when performing reset/calibration. Multiple reset attempts may be required.

스펙 정보