Dash Cam 하드와이어 키트 USB C, 12V-24V - 5V/3A 어댑터 전원 케이블, 전압 디스플레이, 24/7 주차 모드, Acc 감지, 4단계 저전압 보호 (11.6V/11.9V/12.2V/12.5V)

상품 특징

• Car & Vehicle Electronics
• Car Electronics
• On-Dash Cameras
• Image Unavailable Image not available forColor:
• 24/7 Parking Monitor: This power adapter system provides 24/7 parking surveillance, recording incidents like hit-and-runs, vandalism, or theft while your vehicle is off to protect your car and provide crucial evidence.
• Smart 4-Level Voltage Protection :The dash cam power cable ensures 24 hr dash cam security without a dead battery. Simply select the cutoff ((11.6V/11.9V/12.2V/12.5V) for your battery and climate
• the hard wire kit set auto-disconnects to ensure your engine starts
• Real-Time Voltage Display: The built-in screen lets you monitor your battery's voltage at a glance, helping to prevent dead batteries, park with confidence, and quickly diagnose electrical issues
• Universal Compatibility: This ACC hardwire kit works with all 12V-24V vehicles—from cars and trucks to large commercial vehicles—delivering continuous power to your USB-C dash cam. Note: This hardware kit uses the standard A5B5 signal. For dash cams that require an A8B8 signal (as someVan-ture or Rediger models, Incompatible with Ro.ve ), simply connect using the included A8B8 adapter cable.
• ACC Detection: Built-in screen shows your car battery's health at a glance.Automatically switches between Parking mode and Driving mode. No manual setup! Withstands engine start-stop surges for stable performance
• Noise-Reducing Ferrite Core: This Anti-Interference ring acts as a filter to block electrical interference from your car, providing clean power for sharper video and clearer audio—so you capture undeniable evidence
• Easy Installation: Eliminate bulky cigarette lighter cables. This hardwire kit for dash camera includes fuse taps and a special tool for hidden wiring, helping you achieve a clean installation in about 10 minutes—ideal for beginners
• Package Included:11.5ft hardwire kit x1, noise-suppression ferrite x1, installation toolsx1,8pcs fuse taps (Micro2x2, Minix2, LP Minix2, ATOx2)
• Reliable Customer Support：We offer dedicated customer support via Amazon Messaging. If you have any questions, we strive to respond within 12 hours to ensure a satisfactory resolution
• Pre-Purchase Guide:
• Installation: Red → ACC | Yellow → BAT+ | Black → Ground.
• Compatibility: Standard signal: A5B5. For A8B8 dash cams, use the included adapter cable.
• Smart Parking Mode: Activates 3-5 min after engine off.
• Voltage Display: Accuracy: ±0.2V (Low) / ±0.3V (High).
• Low Voltage Protection：Automatically delays shutdown for 5 minutes after voltage drops below the set value (default: 11.6V).
• prevents your dash cam from powering off during auto start-stop cycles or temporary voltage dips, to ensure continuous recording
• and to help protect your car battery from excessive drain.
• Connector: USB type C
• Output :DC5V/3A MAX Support 1-3A
• Operating Tem:-20℃/-4℉-+60℃/140℉
• Cable Length:11.5ft/3.5m
• Low Voltage Protection: 12V(11.8V)
• 24V(23.6V)
• Conversion Efficiency:Maximum Value 96%
• Reserve enough 11.5 ft (3.5 m) power cable enables easy installation in most vehicles.
• Ferrite Core Tip: Detach ferrite core while routing cables. Reinstall it afterward to minimize interference.
• Find the vehicle's fuse box, then use the included tool to remove the panel and access the fuse box. If you are unsure of its location on the vehicle, consult the vehicle's user manual or search the manufacturer's website
• Constant Power:Turn off the vehicle，then use an electric pen to find a fuse that still has power,that is the constant power port.
• ACC Power :With the vehicle off, find a fuse with no power. and then turn the key to ACC.Check the fuse again—if it has power now, it is ACC.
• If a fuse is already in the slot: Remove it and place it into the empty slot on the Add-A-Fuse tap (as picture ashown).
• If the slot is empty: Insert the pre-installed Add-A-Fuse tap directly.
• Yellow conect to constant power(BAT)
• Red conect to ACC power
• Black conect to GND(metal grounding point)
• For 12V Battery：11.6V 11.9V 12.2V 12.5V
• For 24V Batte