YEJMKJ 5Pack Nema 17 Stepper Motor 1.8‌°‌ 2 Phase High Torque 0.6Nm(84.97oz·in) Bipolar 42x47mm 2.3A 1.6Ω 4-Wire Shaft 24mm φ5mm 42 Stepper Motor Cable 1M for 3D Printer DIY Robot CNC Machine

11번가 원화(KRW) 기준 가격입니다.

상품 특징

• Parameters: Nema 17 Stepper Motor 2 Phase, Step angle 1.8‌dge (200 steps/rev), Holding torque 0.6Nm (84.97oz·in), Resistance 1.6Ω, Rated current 2.3A, Inductance 2.0mH±20%, Rotor inertia approx 85g.cm².
• Dimensional data: Key dimensions for Nema 17 Stepper Motor include the following. Body size 42x42x46.7mm, (1.66x1.66x1.84in), Installation hole distance 31mm, Shaft length 24±0.5mm, Shaft diameter φ5mm, D-cut length 24mm, with Cable 1m, 4-Wire Black (A+) Green (A-) Red (B+) Blue (B-), Weight 368g.
• Operational Safety: Operating safely and reliably, this Nema 17 Stepper motor comes with the following key safety parameters. Dielectric strength 500V A.C 1 MINUTE; Insulation class(UL) B (130℃) [266°F]; Insulation resistance 100MΩ MIN; Operation ambient humidity 15%RH～95%RH; Operation ambient temperature -20℃ ～+50℃ [-4°F～122°F]; Temperature rise 80K MAX.
• Precision-Built for Higher Output: Engineered for minimal noise interference, our enhanced Nema 17 Step Motor boasts up to 20% greater holding torque through its higher-grade steel core construction and optimized winding technique. Experience smoother machine cycles with less surrounding disruption.
• Key Points to Remember: Increasing speed lowers torque, with the recommended range of 0–600 RPM. Lower current results in lower torque and temperature rise, while reduced voltage decreases torque (range: 12–24V DC). The 42mm Stepper Motor is widely used in 3D printers, DIY robots, CNC machines, and more. Its compact design and high torque make it ideal for tough applications.

스펙 정보