소형 와이어 커터, 2팩, 12.7cm(5인치), 마이크로 플러시 커터, 스닙

적당한 가격입니다

평균가(9,271원)보다 0% 저렴합니다.

$6.99 9,263원

10월 27일 03:11 기준 아마존 실시간 가격 확인 ↗

최저 $5.65 평균 $7.00 최고 $7.32

해외직접배송 · 관세·배송비 별도

역대 최고가 근처

그래프 로딩 중…

최저7,492
평균9,271
최고9,702
최근 갱신10월 27일 03:11

아마존 달러(USD) 가격을 각 날짜의 환율로 원화 환산해 표시합니다. 현재 환율 $1 = ₩1,325

⇄ 다른 상품과 가격 추이 비교

한눈에 요약

소형 와이어 커터, 2팩, 12.7cm(5인치), 마이크로 플러시 커터의 가격은 10월 27일 03:11 기준 $6.99(약 9,263원)입니다. 추적 기간 역대 최저가는 $5.65(10월 8일), 평균은 $7.00로, 지금은 평균과 같은 수준입니다. 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗

한국까지 예상 비용

상품가
$6.99 (약 9,263원)
면세 한도
$200 (목록통관) · 이하라 면세 예상
예상 합계
약 9,263원 + 배송비
배송비 넣어 다시 계산해 보기 →
  • 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
  • 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
  • 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
  • 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.

상품 특징

  • Tools & Home Improvement
  • Power & Hand Tools
  • Image Unavailable Image not available forColor:
  • 【Small Wire Cutters】5 inch micro 170 flush cutters are small enough to get into tight spaces, side cutters have a flat edge to get close to the piece needing minimal filing down, are pretty strong for cutting thicker pieces of plastic
  • 【Sharp and Precise】Precision wire cutter has an 12mm Long high-frequency hardened carbon steel jaw with angled head design, sharp and well machined. These snips, dykes can easily shear copper and soft wire up to 18 awg
  • 【Internal Spring Loaded】These jewelry wire cutters are internal spring loaded, have a limited opening which makes them easier to hold, convenient to use
  • 【Ergonomic Hand Grip】The cutting pliers, spring loaded wire cutters are covered with PVC material, comfort-grip handles give good leverage, thin and lightweight so it's easy to keep on you
  • 【Wire Cutters Application】Robust quality diagonal cutters, wire clippers are perfect for flush cutting stems of artificial flowers and other wired products used in crafting and decorating. Works well for many things like trimming plastic parts, small wire, pc board , zip ties and so on. Don't try to cut hard steel as it will damage the cutting edge