Jumper Cable Clamps Compatible with Milwaukee M18V Battery, 2FT 14AWG Portable Battery Jumper Starter Automotive Booster Cables Power for Car, Riding, Jump Starting Using Tool

Jumper Cable Clamps Compatible with Milwaukee M18V Battery, 2FT 14AWG Portable Battery Jumper Starter Automotive Booster Cables Power for Car, Riding, Jump Starting Using Tool

46,440원
역대 최저
0원
역대 최고
0원
평균가
0원

가격 변동 그래프

11번가 원화(KRW) 기준 가격입니다.

그래프 로딩 중…

쿠팡에서 더 저렴한 가격을 찾아보세요

쿠팡에서 "Jumper Cable Clamps Milwaukee M18V Battery" 검색

이 포스팅은 쿠팡 파트너스 활동의 일환으로, 이에 따른 일정액의 수수료를 제공받습니다.

상품 특징

  • 【Jumper Cable Clamps】The jump starter cable is designed to be compatible with Mil-waukee M18V batteries. When your car battery drains and leaves you stranded, It may be difficult to find someone to help jump-start your car. Our jumper cables offer you a new solution, allowing you to conveniently use the power from the available cordless tool battery to start your car. *NOTE: (Batteries not included, batteries need to be purchased by yourself)
  • 【Easy to Operation】1 :Ensure the switch is in the OFF position before use.2: Install a battery. Connect red alligator clip to car battery’s positive terminal, connect the black alligator clip to car battery’s negative terminal.3:Pressing the side of the switch marked “-” to turn it on. Digital display shows default 14.8V. After 10–20 minutes of continuous charging, pressing the switch to turn it off. The digital display will show real-time car battery voltage, and if it is above 12V, the car battery can be used normally.4: Remove the two alligator clips, then start your car. *NOTE: (Batteries not included)
  • 【Battery Powered】Our portable starter adapter is designed for convenience and can be easily stored in your vehicle. Compatible with Mil-waukee M18 18V Battery 48-11-1820 48-11-1828 48-11-1840 48-11-1850 48-11-1852 48-11-1860 48-11-1862 and more. Even in outdoor places where there is no power supply, you can easily use it as long as you bring the battery with you. *NOTE: (Batteries not included, batteries need to be purchased by yourself)
  • 【Specifications】Our adapter is made of robust ABS plastic with a convenient, slip-resistant design. Jumper cable Total length 65 cm/2 ft. It features high-quality tinned copper wire cores for excellent conductivity and flexibility. The cables are covered with fire-resistant silicone rubber insulation, and the clamps are made with fully-insulated materials to prevent sparking. Perfect for most motorcycles, cars, and SUVs, capable of jump starting up to 5.0L gasoline and 3.0L diesel engines.
  • 【Precautions】1: Do not reverse the positive and negative poles of the product and the car battery, as this may damage the voltage stabilizing module.2: This is NOT a charger for batteries.3: It draws voltage and power directly from battery, only to charge the car battery.4:Note: This product is used to charge your car battery, cannot directly start your car. 5:Remove the battery, if it not in use for a long time.Note: Always Check If Your Power Bank Is Capable of Supporting Your Car. Keep in Mind, If you have any questions, please tell us and we will give you a satisfactory solution.

스펙 정보

브랜드 RIWELF
모델명 R-JIA-22
품번 R-JIA-22
구성품 Jumper Cables
아이템 수량 1
배터리 필요 여부 불필요