2-Pack 0.4mm Hardened Ceramic Hotend Kit for Anycubic Kobra S1 Combo/ACE Pro + Extra 0.2mm, 0.4mm, 0.6mm, and 0.8mm Hardened Steel Nozzles Thermistor, Heater Cartridge, Heatbreak Extruder Kit

아마존 달러(USD) 가격을 각 날짜의 환율로 원화 환산해 표시합니다. 현재 환율 $1 = ₩1,478 (2026-07-23 기준)

상품 특징

• Dual Pre-Assembled Ceramic Hotends Each kit includes two fully assembled ceramic hotends, each pre-installed with a 0.4mm hardened steel nozzle and thermal silicone sock. Compatible exclusively with Anycubic Kobra S1, S1 Combo, and ACE Pro 3D printers. Warm Tip: Before installation, verify that all components are securely tightened, as parts may loosen during shipping.
• Plug-and-Play Installation Designed for quick and easy installation—simply detach the original hotend and plug in the new ceramic hotend. No wiring or firmware adjustments required, ensuring a hassle-free upgrade. Warm Tip: Ensure the hotend is properly seated in the heat dissipation block. If misaligned, the nozzle may scrape the print bed, leading to potential damage.
• Rapid Heating Performance The ceramic heating element allows the hotend to reach 220°C in approximately 38 seconds, offering more than three times the heating speed of the original setup. This enhancement reduces print preparation time significantly. Warm Tip: When replacing nozzles, especially the 0.2mm size, be cautious of residual adhesive used in factory installations. If the nozzle is difficult to remove, applying gentle heat can help loosen it.
• Comprehensive Nozzle Set Included Comes with four additional hardened steel nozzles (0.2mm, 0.4mm, 0.6mm, and 0.8mm) to accommodate various printing needs, from fine details to high-speed fills. Each nozzle is rated for temperatures up to 500°C, suitable for printing with abrasive filaments.Semi-assembled hotend with all-metal throat design makes the print head heated evenly and the filament flows smoothly in the throat nozzle to support high speed printing.Warm Tip: After installing the new hotend, perform a bed leveling to ensure optimal first-layer adhesion and print quality.
• Enhanced Durability with Silicone Socks Each hotend is equipped with a thermal silicone sock to maintain consistent temperature and reduce heat loss. This feature helps prevent filament oozing and ensures smoother printing over extended sessions. Warm Tip: Always wear heat-resistant gloves when handling heated components to prevent burns or injuries.

스펙 정보