코팅 두께 게이지, Fe 및 NFe 금속용 페인트 두께 미터
- 상품가
- $159.99 (약 215,016원)
- 면세 한도
- $200 (목록통관) · 이하라 면세 예상
- 예상 합계
- 약 215,016원 + 배송비
변동이 거의 없는 가격
기록된 30일 동안 가격 변동 없음
현재 215,016원
그래프 로딩 중…
가격변동 없음기록된 30일 동안
평균215,016원
기록30일8/29~11/4
아마존 달러 가격을 오늘 환율($1 = ₩1,344)로 환산해 표시합니다. 그날 환율 기준 금액은 그래프를 짚으면 보입니다.
⇄ 다른 상품과 가격 추이 비교한눈에 요약
코팅 두께 게이지, Fe 및 NFe 금속용 페인트 두께 미터의 가격은 11월 4일 기준 $159.99(약 215,016원)입니다. 기록된 30일 동안 가격 변동이 거의 없었습니다. 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗
한국까지 예상 비용
- 상품가
- $159.99 (약 215,016원)
- 면세 한도
- $200 (목록통관) · 이하라 면세 예상
- 예상 합계
- 약 215,016원 + 배송비
- 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
- 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
- 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
- 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.
상품 특징
- Industrial & Scientific
- Test, Measure & Inspect
- Dimensional Measurement
- Image Unavailable Image not available forColor:
- Professional Coating Measurement on Metal: Measure dry paint and other supported coatings on ferrous and non-ferrous metal substrates from 0–2000 μm with ±(2% of reading + 1 μm) specified accuracy for automotive, paint-shop, and industrial inspections.
- External Probe for Tight Areas: Use the separate probe on curved, recessed, or hard-to-reach metal surfaces. AUTO, MAG, and EDDY modes use magnetic induction on iron and steel and eddy current on non-ferrous metals.
- Records, Statistics and Store and Export Measurement Data: Four general groups store up to 500 readings each
- DIR readings are not retained after power-off. View count, mean, minimum, maximum, and standard deviation, set high/low alarms, and export stored readings to a PC by USB. Powered by 2 AAA batteries
- USB is for data transfer, not charging.
- Flexible Calibration and Display: Use zero calibration and up to 4-point calibration for each group. Switch among μm, mm, and mil, choose single or continuous measurement, and rotate the LCD 180° for easier viewing.
- For Metal Substrates: Designed for dry coating measurements on ferrous and non-ferrous metals. Not for wet-film measurement or coating checks on plastic, wood, glass, or concrete substrates.
- High-Precision Measurement with Clear DisplayCombining magnetic induction and eddy current principles, EC-770SE measures 0 - 2000μm with ±(2% + 1μm) precision and 0.1μm (0 - 99.9μm)/1μm (≥100μm) resolution. The high-resolution LCD clearly shows data, auto - statistics measurements, and has a red backlight alarm for over - limit data.
- Combining magnetic induction and eddy current principles, EC-770SE measures 0 - 2000μm with ±(2% + 1μm) precision and 0.1μm (0 - 99.9μm)/1μm (≥100μm) resolution. The high-resolution LCD clearly shows data, auto - statistics measurements, and has a red backlight alarm for over - limit data.
- Robust and Reliable in Various EnvironmentsWith an IP40 rating, EC-770SE operates reliably in diverse conditions: storage at - 10 - 60℃, 20 - 90%RH (non - condensing)
- operation at - 10 - 50℃, 20 - 90%RH (non - condensing).
- With an IP40 rating, EC-770SE operates reliably in diverse conditions: storage at - 10 - 60℃, 20 - 90%RH (non - condensing)
- Fe (Magnetic Substrate): Auto-identifies iron, steel, or nickel bases - measures paint/coating up to 2000μm on car bodies or machinery.
- NFe (Non-Ferrous Substrate): Measures coatings on aluminum, copper, stainless steel - perfect for aircraft parts or electronics.
- #126,339 in Industrial & Scientific (See Top 100 in Industrial & Scientific)
- #93 in Thickness Gauges
- Flexible Calibration and Display: Use zero calibration and up to 4-point calibration for each group. Switch among μm, mm, and mil, choose single or continuous measurement, and rotate the L