Polymaker Fiberon ASA-CF08 3D 프린팅 필라멘트 검정 1.75mm 0.5 킬로그램

상품 특징

• Industrial & Scientific
• Additive Manufacturing Products
• 3D Printing Supplies
• 3D Printing Filament
• Image Unavailable Image not available forColor:
• 0.5kg Fiberon Asa-cf08 Black
• 0.5kg Fiberon Pa6-cf20 Black
• 0.5kg Fiberon Pa6-gf25 Grey
• 0.5kg Fiberon Pa612-cf15 Black
• 0.5kg Fiberon Pa612-esd Black
• 0.5kg Fiberon Pet-cf17 Black
• 0.5kg Fiberon Petg-esd Black
• 0.5kg Fiberon Petg-rcf08 Black
• 0.5kg Fiberon Pps-cf10 Black
• 1kg Fiberon Pa6-cf20 Black See available options
• 1kg Fiberon Pet-gf15 Black See available options
• 1kg Fiberon Pet-gf15 White See available options
• 1kg Fiberon Petg-esd Black See available options
• 3kg Fiberon Asa-cf08 Black See available options
• 3kg Fiberon Pa12-cf10 Black See available options
• 3kg Fiberon Pa6-cf20 Black See available options
• 3kg Fiberon Pa612-cf15 Black See available options
• 3kg Fiberon Pa612-esd Black See available options
• 3kg Fiberon Pet-cf17 Black See available options
• 3kg Fiberon Pet-gf15 Black See available options
• 3kg Fiberon Petg-esd Black See available options
• 3kg Fiberon Petg-rcf08 Black See available options
• Light Grey See available options
• 8% Carbon Fiber Reinforced ASA: Fiberon ASA-CF08 combines ASA with 8 wt% carbon fiber to increase rigidity and dimensional stability while maintaining the UV and weather resistance associated with ASA. Designed for outdoor housings, fixtures, brackets, tooling, and functional prototypes.
• Mechanical and Heat Performance: Typical TDS values include 43.5 MPa X-Y tensile strength, 69.1 MPa X-Y bending strength, and a 3.61 GPa X-Y Young’s modulus. Heat deflection temperature reaches 103°C at 0.45 MPa. Final performance varies with part design and printing conditions.
• For Outdoor and UV-Exposed Parts: ASA provides resistance to UV exposure and changing weather conditions, while carbon fiber creates a rigid, matte surface. Suitable for exterior housings, automotive prototypes, agricultural equipment, brackets, and other functional components.
• Rigid Filament - Handle with Care: The unprinted filament may snap if bent tightly. Maintain a bending diameter above 60 mm, avoid sharp turns, and keep the feed path smooth and direct. Store and print below 20% relative humidity
• dry at 90°C for 6 hours if the material has absorbed moisture.
• Printing Requirements: Use a wear-resistant nozzle, 260–280°C nozzle temperature, 90–100°C build plate, and keep the cooling fan off. An enclosed printer is recommended to reduce rapid cooling and cracking. Print in a well-ventilated area, and allow parts to cool naturally before removal.