LUCKY HERP 조광 온도 조절기 및 타이머가 있는 파충류 조명 기구, 알루미늄 14cm(5.5인치) 딥 돔 파충류 램프 고정 장치, 파충류 전구 배스킹 열 전구용 열 램프 고정 장치, 최대 100W

상품 특징

• Reptiles & Amphibians
• Terrarium Heat Lamps & Mats
• Image Unavailable Image not available forColor:
• Intelligent Thermostat Control - LUCKY HERP reptile light fixture with dimming thermostat adopts precise PID thermostat mode to maintain the temperature stably, providing an adjustable range of 20°C- 50°C (68°F - 122°F) to ensure the stability of the reptile growing environment. The high-precision temperature sensor monitors the temperature in real time and automatically adjusts the power to avoid temperature fluctuations that may affect your pet's health.
• High Efficiency Reptile Light Fixture - The reptile heat lamp fixture is made of high-quality aluminium reflective material, which can effectively enhance the UVA and UVB output, improve the heating efficiency and prolong the service life of the bulb. The top reserved cooling holes ensure excellent ventilation and heat dissipation to avoid overheating and affecting the performance of the device.
• Safe & Durable Design - Adopts high temperature resistant ceramic lamp head, standard E26 base, can withstand up to 100W power, suitable for a variety of reptile bulbs including reptile night bulbs, ceramic heat lamps, infrared heat lamps, basking bulbs. Compared with ordinary thermostats, the thermostatic PID heating mode is more stable and efficient, which can extend the life of the bulb.
• Easy Installation - Simply fix the temperature probe to the area of the terrarium to be monitored and switch on the power. Long press the SET button for 3 seconds to switch on, press the up and SET keys to enter the temperature setting, at this time, the end of the temperature value is flashing, indicating that it enters the setting mode. Press up and down button to adjust the target temperature, press SET button again to determine the temperature.
• Timing Function - In working mode, press down key and SET to enter into timing setting, the default duration is 0H
• press up key to select timing duration in turn: 2H → 4H → 8H → 12H
• press down key to reduce to 0H
• Then press SET to confirm. Stop after the timer is finished, and the LED displays ‘--’. In the case of not turning off the power and power failure, the system will restart and repeat the timing function when the set time point is reached on the next day.
• Power Failure Memory Function - Due to accidental power failure or when the main power supply is switched off. After re-powering the thermostat will automatically start to work and restore the set value to repeat the timer cycle function. Note: If manually long press the SET button to turn off the power after the thermostat timing function will be reset to zero, the next time turn on the work need to reset the working hours, otherwise it will work 24 hours.
• Thermostat & Timer Operation & Temperature Guide - This shade does not include bulbs
• only matched bulbs within rated power are applicable. The thermostat auto pauses heating when hitting preset temp. A flashing indicator is a low‑temperature alert. The screen flashes when ambient temperature drops 3°C below your set temperature, warning you that the temperature is too low. Set target temperature higher than ambient air to activate heating. Complete timer setup and press confirm to save, otherwise the LED screen will stay on setting mode. Place probe away from bulbs to avoid inaccurate readings.
• Correct Installation & Daily Maintenance Tips - Screw the compatible bulb fully tight for stable contact
• mismatched or over-power bulbs cause overheating & circuit failure. Do not use high-power bulbs in tiny closed tanks. Regularly clean lamp contacts, operate gently during bulb replacement and keep away from water splash. Bulbs are consumables requiring periodic replacement, burnt bulbs do not mean the lamp shade is defective.