홈 · 자동차 용품 · 공구 및 장비
1 / 7
1 / 7

    두 번 탭하면 확대돼요 사진을 누르면 확대돼요

    LOTOS LTP8050 CNC 80AMP Blow Back Arc Plasma Cutter, CNC Interface Ready, HTC/Arc OK Output, Drag Cut Enabled, 1" 25mm Clean Cut, Metal Cutting Machine, 220V

    지금이 역대 최저가예요

    역대 최저가(2026년 10월 13일, 1,075,118원)와 같아요. 이 가격은 흔치 않아요. 지금 구매를 추천해요.

    $799.98 1,075,118원

    10월 14일 기준 아마존 실시간 가격 확인 ↗

    최저 $799.98 평균 $807.67 최고 $899.98
    아마존에서 구매 ↗

    해외직접배송 · 관세·배송비 별도

    지금 역대 최저가

    마지막 변경 9월 12일 1,209,511원 → 1,075,118원 ▼11% · 7일 전 기록 없음 · 30일 전과 같음 · 33일 동안 1번 바뀜(드묾)

    보통 가격 1,075,118원 현재 1,075,118원

    그래프 로딩 중…

    최저1,075,118원10/14 · 최저가 12일
    평균1,085,456원
    최고1,209,511원9/11
    기록13일9/11~10/14

    가격 변동 내역

    가격이 바뀐 날(최근 순). 기록이 없는 기간도 함께 적었습니다.
    날짜가격변화
    기록 없음 10/3~10/12 (10일)
    기록 없음 9/23~9/26 (4일)
    기록 없음 9/19~9/21 (3일)
    9월 12일 1,075,118원 $799.98 역대 최저 ▼11%
    9월 11일 1,209,511원 $899.98 기록 시작

    아마존 달러 가격을 오늘 환율($1 = ₩1,344)로 환산해 표시합니다. 그날 환율 기준 금액은 그래프를 짚으면 보입니다.

    ⇄ 다른 상품과 가격 추이 비교

    한눈에 요약

    LOTOS LTP8050 CNC 80AMP Blow Back Arc의 가격은 10월 14일 기준 $799.98(약 1,075,118원)입니다. 지금이 추적 기간 역대 최저가 수준입니다(최저 $799.98, 10월 14일). 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗

    한국까지 예상 비용

    상품가
    $799.98 (약 1,075,118원)
    면세 한도
    $200 (목록통관) · 초과라 전액 과세
    예상 관세
    86,009원 (일반 공산품 8%)
    예상 부가세
    116,113원 (10%)
    예상 합계
    약 1,277,240원 + 배송비
    배송비 넣어 다시 계산해 보기 →
    • 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
    • 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
    • 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
    • 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.

    상품 특징

    • Tools & Home Improvement
    • Welding & Soldering
    • Welding Equipment
    • Welding Equipment & Accessories
    • Plasma Cutting Equipment
    • Image Unavailable Image not available forColor:
    • CNC 80A 1" Clean Cut
    • 63A 3/4" Clean Cut
    • 85A 1" Clean Cut
    • CNC 63A 3/4" Clean Cut
    • CNC Interface for Custom Parts: Connect the plasma power source to a compatible CNC table through its remote start input, Arc OK output and arc-voltage output. Supports compatible external torch height control (THC) equipment for cutting brackets, metal signs and repeat parts. CNC table and THC equipment are sold separately.
    • Non-HF Blowback Pilot Arc: Start the arc without touching the workpiece. Blowback ignition avoids high-frequency arc starting for CNC applications, while the pilot arc supports cutting expanded metal and uneven surfaces. Select plate or mesh mode to match the workpiece.
    • 80A Output for Metal Fabrication: Adjust cutting current from 20 to 80A on single-phase 220/240V power. Achieve up to 1 in. clean cuts with the hand torch, depending on material, air supply and travel speed. Cuts mild steel, stainless steel, alloy steel, aluminum and copper. Clean-cut capacity is not a CNC piercing rating.
    • Handheld Cutting and Optional Drag Cutting: Use the included 14-ft torch with central connector for repairs and template work. For hand-guided drag cutting, add compatible LOTOS DC8509 consumables to follow patterns or straightedges along the workpiece. The drag-cut set is sold separately.
    • Controls and Shop Setup: The LED display, 2T/4T modes and adjustable pilot arc and post-flow settings support short cuts and longer passes. A pre-installed 1/4 in. NPT Type D fitting and filter-regulator simplify hookup. Requires external clean, dry compressed air and 220/240V power. Backed by LOTOS U.S.-based support and a 3-year limited warranty
    • terms apply.
    • 80A High Output & CNC Ready: Cleanly cuts up to 1" (25mm), with max severance of 1 1/2" (38mm), powered by a stable 80A DC output. Built-in CNC interface port ensures smooth automation.
    • Advanced Features for Precision: Adjustable Pilot Arc Timing (6–15s), Post-Flow Timer (2–10s), and Air Pressure Range Indicator allow full control over arc quality and consumable life.
    • Drag Cut Enabled: Designed for direct contact with the workpiece, allowing smooth, accurate lines—perfect for templates or manual freehand cuts.
    • User-Friendly Setup: Comes pre-installed with NPT 1/4" Type D plug and an integrated air filter regulator for quick compressor connection.
    • Dual Voltage Support: Operates on 220V/240V (recommended 50A breaker), compatible with input voltages from 215–245V. Requires >75 PSI @ 4.0 SCFM air pressure.
    • Pin 1–2: CNC plug-in detection
    • Pin 2–3: Start signal input
    • Pin 4–5: Arc success output
    • Improved Cutting Precision – Drag cutting allows for smoother and more controlled movement, reducing the risk of uneven edges and ensuring cleaner cuts.
    • Enhanced Operator Control – By keeping the torch in direct contact with the material, drag cutting provides better stability, making it easier to guide the cut along precise lines.
    • Reduced Hand Fatigue – Unlike freehand cutting, which requires maintaining a consistent standoff, drag cutting minimizes strain on the operator, leading to less fatigue and more consistent results.
    • Increased Cutting Speed – Drag cutting enables faster cutting speeds since the torch remains steady against the material, allowing for efficient and continuous operation.
    • Better Consumable Life – Keeping the torch in contact with the material reduces excessive arc fluctuations, leading to lower wear on consumables and extending the lifespan of electrodes and nozzles.
    • Upgraded 80A Plasma Cutter: Delivers clean cuts up to 1" (25mm) and maximum severance up to 1 1/2" (38mm), suitable for stainless steel, alloy steel, aluminum, and more. Ideal for both manual and CNC use.
    • Blowback Arc Start (Non-HF): Non-high-frequency arc starting method prevents interference with nearby electronics, making it CNC-compatible and workshop-safe.
    • Drag Cu