JD300 360° 전기 테이블 탑 회전 테이블 지름 300mm

상품 특징

• 【마킹 머신 360° 회전 테이블】모델: JD300
• 설치 구멍 간격: 50*75mm, 다른 그룹은 60*90mm (총 두 그룹, 8개의 장착 구멍)
• 중심 하중: 20KG
• 자체 무게: 5.5KG
• 테이블 직경: 300mm
• 감소 기어 모델: RV30
• 감속비. : : 10:1 스테핑 모터: NEMA23, 57*76mm
• 【특징】작은 공작물의 멀티 스테이션 마킹, 더 큰 원형 공작물 표시, 제품 검사 등에 적합합니다. 스핀들은 잠금 기능이 있는 스케일로 왼쪽으로 0-45° 회전할 수 있습니다. 57 스테핑 모터를 채택하여 자동 제어가 가능합니다.
• 【각도 조절】손잡이를 시계 반대 방향으로 돌리면 각도를 조정할 수 있습니다. 알루미늄 합금 소재의 본체, 360° 각도 조정, 보다 정확한 정밀도.
• 【RV30 스레드 웜 기어 감속기】두꺼운 터빈, 구리 터빈, 두꺼운 소재, 고강도, 내마모성, 일체형 알루미늄 합금 케이스, 빠른 열 방출, 향상된 내구성, 작은 사이즈, 견고하고 신뢰할 수 있으며 녹슬지 않습니다.
• 【57 x 76 스테퍼 모터】강한 열 방출 및 균일한 배선, 코일은 100% 순수 구리 에나멜 와이어로 만들어졌으며 첨단 기술로 감겨 있으며 구리 와이어가 고르게 배열되어 장시간 작동 시 고온, 토크 감소 및 소음 문제가 없습니다.
• The rated center load of the equipment is 20KG. When customizing, attention should be paid to:
• Static load: The total weight of the workpiece and fixture, with a center load not exceeding 16KG (with a 20% safety margin reserved)
• Eccentric load: The distance between the center of gravity of the workpiece and the center of rotation should be controlled within ≤ 100mm. The larger the eccentricity, the lower the actual load-bearing capacity. For reference, when the eccentricity is 100mm, it is recommended to load ≤ 10KG to avoid overloading the reducer and bearings.
• The weight of the fixture should not be too large, and aluminum alloy material is preferred to avoid adding additional loads to the workbench and gearbox, and reduce long-term wear and tear.
• All fixed screws must be equipped with spring washers or anti loosening nuts to prevent the workpiece or fixture from loosening during rotation, especially in high-speed rotation scenarios (such as continuous rotation of a marking machine), where the influence of centrifugal force needs to be additionally considered.
• Mounting hole spacing: 50*75mm, the other group is 60*90mm (a total of two groups, eight 6.5 mounting holes)
• Centre load: 20KG
• Self-weight: 5.5KG
• Table diameter: 300mm
• Reducer model: RV30
• Reduction ratio: 10:1
• Stepping motor: NEMA, 57*76mm
• The maximum outer diameter of fixtures and workpieces must be kept at a safe distance from the center of rotation of the workbench, while avoiding the motor, reducer, handle structure on the side of the equipment, as well as the processing heads above.
• Suggestion: Draw a rotating envelope diagram to confirm that the minimum gap between the workpiece and fixture and the equipment body or processing head is ≥ 5mm when rotating once.
• It is necessary to consider the stroke of the processing equipment, such as the Z-axis stroke of the laser marking machine, and the total height of the fixture and workpiece should not exceed the processing range of the equipment, while avoiding the workpiece being too high and causing shaking during rotation.
• If the fixture requires external air pipes or wires (such as pneumatic fixtures), sufficient length must be reserved or slip ring design must be used to avoid cable entanglement during rotation.
• The workbench supports 360 ° stepless angle adjustment and, in conjunction with a reduction motor, achieves high-precision positioning, suitable for continuous marking and scale carving of circular/ring-shaped workpieces.
• The tabletop is detachable and filled with M6 threaded holes, and can be customized with fixtures according to needs to accommodate workpieces of different sizes.
• Adopting RV30 worm gear reducer with self-locking function, it will not reverse after power failure, ensuring stable position during processing, and providing 10 times torque amplification to enhance load capacity.
• The main body is made of aluminum alloy material, balancing strength and lightweight
• The side is equipped with a manual adjustment handle, which can manually adjust the angle in power-off state, making it convenient for tool alignment and debugging.
• Marking machine: perform circular marking and scale processing on the surface of rings, rings, and cylinders.
• Carving/dispensing equipment: Achieve automated rotary processing of circular workpieces, such as carving circular nameplates and bowl