저전압 컷오프 모듈 XH-M609(12-36V) 납산 및 리튬 배터리용, 태양열 패널 조명 시스템용 저전압 차단 스위치(12V) 특징, 전원 컨버터 2개 팩

가격이 거의 변하지 않아요

기록된 13일 동안 가격이 바뀐 적이 없어요. 언제 사도 가격 차이가 크지 않아요.

$9.99 13,314원

11월 1일 02:10 기준 아마존 실시간 가격 확인 ↗

해외직접배송 · 관세·배송비 별도

변동이 거의 없는 가격

기록된 13일 동안 가격 변동 없음

현재 13,314원

그래프 로딩 중…

가격변동 없음기록된 13일 동안
평균13,314원
기록13일8/31~11/1

아마존 달러 가격을 오늘 환율($1 = ₩1,333)로 환산해 표시합니다. 그날 환율 기준 금액은 그래프를 짚으면 보입니다.

⇄ 다른 상품과 가격 추이 비교

한눈에 요약

저전압 컷오프 모듈 XH-M609(12-36V) 납산 및 리튬 배터리용의 가격은 11월 1일 02:10 기준 $9.99(약 13,314원)입니다. 기록된 13일 동안 가격 변동이 거의 없었습니다. 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗

한국까지 예상 비용

상품가
$9.99 (약 13,314원)
면세 한도
$200 (목록통관) · 이하라 면세 예상
예상 합계
약 13,314원 + 배송비
배송비 넣어 다시 계산해 보기 →
  • 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
  • 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
  • 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
  • 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.

상품 특징

  • Power Accessories
  • Power Converters
  • Image Unavailable Image not available forColor:
  • OVER-DISCHARGE PROTECTION: This battery controller offers extensive flexibility in discharging modes and parameter settings. Users can configure parameters to automatically disconnect the battery when it reaches a preset voltage, thereby preventing over-discharge and extending battery life (Note:The relay does not contain a power cut-off switch,remember to cut off the power supply after disconnection, otherwise the module will continue to use the battery until the voltage is 0.). The customizable parameters enable users to tailor their power management system to specific requirements and preferences
  • SIMPLE OPERATION: To restore factory settings, power off the device, press and hold both buttons simultaneously, and then power on. The screen will display "888," indicating that the factory settings have been restored. The default protection value is set at 12V with a difference value of 2V. The difference value represents the voltage range between disconnecting and reconnecting the battery. User settings are retained in the event of an unexpected power loss, ensuring critical data is preserved and allowing seamless resumption of operations
  • SCOPE OF APPLICATION: This device is a voltage controller that employs a relay to switch the output on and off. The relay functions solely as a switch and does not alter the voltage. It is a protective switching module and does not include batteries. Compatible batteries include lead-acid, lithium-ion, and solar panel batteries. This module is not suitable for battery packs
  • PARAMETERS: Board Size: 57 x 42 x 19 mm (2.24 x 1.65 x 0.75 inches) LxWxH
  • Input Voltage: DC 12-36V
  • Accuracy: ±0.1V
  • Power Consumption: <1.5W
  • Maximum Current before Breaker Trips: 20A
  • NOTE: Due to the size constraints of the PCB board, this module features a miniaturized relay and thin circuit lines. Therefore, the current during actual use should not exceed 8A to prevent damage to the relay contacts. The maximum current is 10A when the voltage is below 12V, and it should be less than 8A when the voltage exceeds 12V