Upgraded for Bambu Lab 3D Printer PLU Build Plate for Bambu Lab X1 X1C X1E P1S P1P A1, Energy-Saving Low-Temperature Cold Printing, Farm's First Choice, Super Sticky no Edge Warping

상품 특징

• Industrial & Scientific
• Additive Manufacturing Products
• 3D Printer Parts & Accessories
• 3D Printer Accessories
• Image Unavailable Image not available forColor:
• 【New Material PLU Build Plate, not PEI Sheet】The new material build plate we have launched is not a traditional PEI sheet, it is made of a unique polymer. Both sides are coated with 0.125mm PLU coating sprayed then dipped in high quality polymer based coating for power adhesion to the surface. This design not only enhances the durability of the build plate, but also improves the stability of the printed part, far exceeding traditional PEI, making room temperature printing possible with strong adhesion. It helps greatly improve the success rate of printing and save energy.
• 【Room Temperature Printing】The PLU build plate ensures warp-free printing at room temperatures. This allows you to keep the auxiliary fan on and eliminate concerns about drafts affecting your prints, even in open models like the P1P and A1.
• 【Unmatched Adhesion】The PLU build plate is compatible with PLA at a low temperature range of only 30-50℃, and PETG at only 50-70℃. It performs better in model adsorption than traditional PEI sheets, even at lower temperatures, thanks to its superior first-layer adhesion. No glue or hairspray is needed, and it prevents edge warping and print falling off. Note: ABS and TPU filament are not recommended for use with this build plate.
• 【Energy-Saving】The PLU build plate effectively prevents clogs caused by extruder overheating, eliminating the need for extruder maintenance. Additionally, it saves 50W/h of power compared to traditional PEI build plate printing that requires bed heating, resulting in a 50% energy savings.
• 【Enhance the overhanging quality】PLU Sheet has better model adsorption than traditional PEI Sheet. Better solve the problems of edge warping and printing falling off. The plate can enhance the overhanging quality. For prying skirts,brims and other thin parts on the build surface use a plastic build plate scraper only. Using a steel spatula or metal blade may permanently scratch and damage the build plate.
• 【Effortless Prints Removal】 The Bambu Lab build plates enable easy prints removal. Simply bend the surface of the build plate, and your prints will detach cleanly without the need for any scraping or prying tools. It is compatible with Bambu Lab P1P, Bambu Lab P1S, Bambu Lab X1C, Bambu Lab X1,Bambu Lab X1E and Bambu Lab A1 3d printers.
• 【Easy to Clean】The Double Side Use PLU build plate surface can be cleaned with water only, avoiding the use of detergent or solvents. Strictly avoid using IPA, alcohol, or acetone to clean the surface, as these chemical detergents will destroy the coating and function of the plate, rendering it unusable.
• 【With QR Code】The plate is printed with a QR code to help the X1 series 3d printer recognize and level better. And It does not affect the printing of P1S and A1.and Our plates are thicker than the PEI plates on the market. The thick plates can support larger model printing without dents.