드릴용 2.5cm(1인치) 스테인리스 스틸 와이어 보어 브러시 5개, 25mm 와이어 클리닝 브러시

가격이 거의 변하지 않아요

기록된 13일 동안 가격이 바뀐 적이 없어요. 언제 사도 가격 차이가 크지 않아요.

$9.99 13,332원

10월 31일 01:07 기준 아마존 실시간 가격 확인 ↗

해외직접배송 · 관세·배송비 별도

변동이 거의 없는 가격

기록된 13일 동안 가격 변동 없음

현재 13,332원

그래프 로딩 중…

가격변동 없음기록된 13일 동안
평균13,332원
기록13일9/17~10/31

아마존 달러 가격을 오늘 환율($1 = ₩1,335)로 환산해 표시합니다. 그날 환율 기준 금액은 그래프를 짚으면 보입니다.

⇄ 다른 상품과 가격 추이 비교

한눈에 요약

드릴용 2.5cm(1인치) 스테인리스 스틸 와이어 보어 브러시 5개의 가격은 10월 31일 01:07 기준 $9.99(약 13,332원)입니다. 기록된 13일 동안 가격 변동이 거의 없었습니다. 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗

한국까지 예상 비용

상품가
$9.99 (약 13,332원)
면세 한도
$200 (목록통관) · 이하라 면세 예상
예상 합계
약 13,332원 + 배송비
배송비 넣어 다시 계산해 보기 →
  • 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
  • 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
  • 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
  • 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.

상품 특징

  • Industrial & Scientific
  • Abrasive & Finishing Products
  • Abrasive Brushes
  • Image Unavailable Image not available forColor:
  • 8-25mm | 5/16"-1" See available options
  • [High Quality] The shank of our abrasive brush is galvanized to ensure its excellent rust resistance and durability. The bristles are made of stainless steel and featuring a twisted wire form to make them tougher and more durable for powerful cleaning.
  • [Universal Hex Shank] The universal 1/4" hex shank design allows this brush to easily mount on a driver handle, power drill, or die grinder for efficient cleaning.
  • [Widely Application] The wire cleaning bore brush is designed for easy access to narrow holes and narrow areas, widely used in dust removal, rust removal, corrosion removal and polishing of pipes, ports and bearings.
  • [Package Included] You will get 5 pcs stainless steel bore brushes. The diameter of round brushes is about 1"(25mm) with 1/4 inch hex shank. The total length is 4inch. It is suitable to replace traditional bore brush.
  • [Warm Tips] Please keep in mind that these stainless steel hole brushes can only be used in push and pull motions. When using a drill or die grinder, avoid turning counterclockwise and do not exceed 600 rpm.