배기 개스킷 2개, 5.7cm(2.25인치) 3볼트 배기 플랜지 개스킷, 다기능 매니폴드/헤더/머플러/촉매 컨버터 개스킷 5.7cm(2.25인치)
- 상품가
- $4.99 (약 6,661원)
- 면세 한도
- $200 (목록통관) · 이하라 면세 예상
- 예상 합계
- 약 6,661원 + 배송비
- 브랜드
- Salior
- 소재
- 2.25 inch
- Item Thickness
- 0.25 inches
- 색상
- 2.25 inch
- Upper Temperature Rating
- 80 °C
가격 변동
기록된 2일 동안 가격 변동 없음
현재 6,661원
그래프 로딩 중…
아마존 달러 가격을 오늘 환율($1 = ₩1,335)로 환산해 표시합니다. 그날 환율 기준 금액은 그래프를 짚으면 보입니다.
⇄ 다른 상품과 가격 추이 비교한눈에 요약
배기 개스킷 2개, 5.7cm(2.25인치) 3볼트 배기 플랜지 개스킷의 가격은 10월 27일 기준 $4.99(약 6,661원)입니다. 가격 이력이 아직 짧아 역대 최저가와 비교한 판단은 보류합니다. 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗
한국까지 예상 비용
- 상품가
- $4.99 (약 6,661원)
- 면세 한도
- $200 (목록통관) · 이하라 면세 예상
- 예상 합계
- 약 6,661원 + 배송비
- 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
- 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
- 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
- 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.
상품 특징
- Replacement Parts
- Image Unavailable Image not available forColor:
- ✨ PROTECTING THE ENGINE: The main function of this manifold gasket is to seal and insulate the car, which makes it an important car accessory to protect the car's engine. Therefore if this gasket is broken, the car will experience a significant increase in noise, while there will be a lot of smoke and unpleasant smell in the engine compartment.
- ✨ VARIETY OF SIZES TO CHOOSE FROM: Our catalytic converter gaskets are available in five sizes: 2" and 2.25" gaskets have the same bolt spacing of 2.95"/75 mm, 2.5" gaskets have a bolt spacing of 3.5"/89 mm, 3" gaskets have a bolt spacing of 4"/103 mm, and 3.5" gaskets have a bolt spacing of 4.1"/105 mm.
- ✨ COMPOSITE MATERIAL: Our exhaust gasket is made of premium composite material, the middle material is graphite asbestos, which has good high temperature resistance and sealing
- the outer layer is galvanized sheet, which is strong and durable, and is not easy to rust. The combination of the two is what makes up this essential car part.
- ✨ EASY INSTALLATION: Each of our bags comes with 2 pieces of the same size gasket. This gasket has 3 slotted bolt holes, simply place the muffler heat tab on the connector, align the piston holes, make sure the screw holes and bolt holes are lined up, tighten the nut to make sure the gasket is securely installed.
- ✨ WIDE APPLICATION: Our multi-functional gasket can be applied to many other pipes in addition to replacing exhaust pipe gaskets. It can also be graphite asbestos gasket/ manifold gasket/ header gasket/ muffler gasket/ catalytic converter gasket. No matter where it is installed, it works well to help keep the unit functioning properly.
- #97,312 in Automotive (See Top 100 in Automotive)
- #96 in Automotive Replacement Exhaust System Gaskets