12.7cm(5인치) 240 실리콘 카바이드 HD 트위스트플렉스 실린더 호네 11.38cm - 12.73cm 보어용

상품 특징

• Industrial & Scientific
• Abrasive & Finishing Products
• Finishing Products
• Image Unavailable Image not available forColor:
• 3-1/2" Heavy Duty
• 4-1/2" Heavy Duty
• Silicon Carbide
• 1-1/2" See available options
• 1-1/4" See available options
• 1-3/4" See available options
• 1-7/8" See available options
• 3-1/2" See available options
• 4" See available options
• 4-1/4" See available options
• 4-1/4" Heavy Duty See available options
• 7/8" See available options
• 80 Grit Silicon Carbide
• 120 Grit Silicon Carbide
• 180 Grit Silicon Carbide
• 240 Grit Aluminum Oxide
• 320 Grit Aluminum Oxide
• 320 Grit Silicon Carbide
• 400 Grit Silicon Carbide
• What's Included: 1 each Pro-Graad TwistFlex Heavy Duty Size: 5" (127mm) Bore Diameter, Working Length of Brush 5.98" (152mm), Shank Diameter 0.402" (10.2mm), Overall Length 17.52" (445mm). for USE ON BORE DIAMETERS 4.48" - 5.01". This heavy duty TwistFlex hone features 30% more abrasive globules versus a standard hone.
• The Pro-Graad TwistFlex Heavy Duty 5" Cylinder Honing & Deburring Tool is manufactured oversized - ORDER BY THE BORE SIZE. Brush will be approximately ten percent oversized, but will easily conform and fit into the bore size diameter due to the flexibility of the honing tool stems.
• Pro-Graad TwistFlex Heavy Duty Cylinder Honing & Deburring Tool brushes have round abrasive spheres fastened to ends of flexible stems, which produces pressure and finishing evenly and consistently. Excels on Cast Iron, Mild Steel, Stainless Steel and other softer ferrous materials. With a working brush length of 5.98”, this Heavy-Duty Version Features 30% More Abrasive Honing Globules as compared to a standard cylinder hone.
• The Pro-Graad TwistFlex Heavy DutCylinder Honing & Deburring Tool can be run with hand tools, drill press, or CNC equipment. Apply a lubricant liberally such as a honing tool lubricant, 10-30 weight motor oil, or transmission fluid prior to using honing tool brush. Max RPM is 1200, however optimum range is 600 - 800 RPM. Tip: If producing cross-hatching pattern, less is best - maximum of two passes should be done with brush within 20-45 seconds of total run time, averaging between 10-55 strokes.
• The 5 inch TwistFlex Cylinder Honing & Deburring Tool is self-centering, self-aligning and will conform to the bore diameter to provide consistent surface finishing, as well as deburring any cross-drilled holes. The brush is self-compensating to produce a consistent finish throughout the life of the tool.