홈 · 컴퓨터 · 외부 구성 요소
1 / 6
1 / 6

    두 번 탭하면 확대돼요 사진을 누르면 확대돼요

    JONSBO C6 Black Mini MATX Mesh PC Case,Simple Compact Desktop Micro ATX Chassis,Upper Cover/Side Panel Tool-Free Open pc case, ATX Power Bite (L185mm Max.),Support 75mm CPU Cooler,GPU200-255mm

    가격이 거의 변하지 않아요

    기록된 7일 동안 가격이 바뀐 적이 없어요. 언제 사도 가격 차이가 크지 않아요.

    $59.99 80,269원

    9월 21일 00:27 기준 아마존 실시간 가격 확인 ↗

    아마존에서 구매 ↗

    해외직접배송 · 관세·배송비 별도

    변동이 거의 없는 가격

    기록 7일

    기록된 7일 동안 가격 변동 없음

    현재 80,269원

    그래프 로딩 중…

    가격변동 없음기록된 7일 동안
    평균80,269원
    기록7일8/29~9/21

    아마존 달러 가격을 오늘 환율($1 = ₩1,338)로 환산해 표시합니다. 그날 환율 기준 금액은 그래프를 짚으면 보입니다.

    ⇄ 다른 상품과 가격 추이 비교

    한눈에 요약

    JONSBO C6 Black Mini MATX Mesh PC Case의 가격은 9월 21일 00:27 기준 $59.99(약 80,269원)입니다. 기록된 7일 동안 가격 변동이 거의 없었습니다. 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗

    한국까지 예상 비용

    상품가
    $59.99 (약 80,269원)
    면세 한도
    $200 (목록통관) · 이하라 면세 예상
    예상 합계
    약 80,269원 + 배송비
    배송비 넣어 다시 계산해 보기 →
    • 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
    • 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
    • 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
    • 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.

    상품 특징

    • Computers & Accessories
    • Computer Components
    • External Components
    • Image Unavailable Image not available forColor:
    • Simple Compact Desktop Micro ATX PC case ,mesh chassis:Heat free-All sides in mesh, Front/Upper/Lower 3 fan positions
    • Easy and quick disassembly design-Upper Cover/Side Panel Tool-free Open,Easier to build your PC,More convenient
    • Compatible motherboard: ITX/M-ATX ( 2 project references) Drive Bay:3.5HDD *1 or 2.5SSD*2 Front interface:Type-C(20PIN)/USB3.0*1/AUDIO*1+MIC*1 (2 IN 1)
    • ATX PSU :185mm,Cooler :75mm,GPU : 200-255mm Fan: Top plate 120mm*1 or 140mm*1 (Optional) ,Bottom 120mm or 140mm*1,Front 120mm*1or HDD
    • Size :202mm(W) x266mm(D)x295.2mm(H) (Include the footpad)
    • #56 in Computer Cases
    • the loudest part of the computer is my graphics card fans, and they are not disruptively loud. I found that the best configuration was to have the fan on the bottom and front of the case blow air into the case, while the top fan would blow air out.A couple of things to keep in mind to make your life easier:- I used and recommend using slim 120mm fans on all three sides. It made everything so much easier. I personally used Arctik P12 Slims and have been very satisfied.- I also used fan grills on each of the fans, though they ended up being mostly useless. You may or may not find them helpful. They're cheap enough that I would recommend them either way.- The side panels are all held on with plastic pins. I thought that these pins would not hold the panels on all that well, but it seems to be holding up fine.- I would not use an ATX power supply where the cables cannot be removed. There's just enough room for the motherboard, CPU, and GPU cables, nothing more.- Similarly, I would not recommend this case if you want to use a sata drive. I would only recommend m.2 drives.- My build with the mATX board and two fan graphics card did not allow enough space for the front connectors, so I have no USB in the front, only the power button. I was half expecting this, and the case is so small that it's easy to reach around back and use the rear connectors, but it is something to keep in mind. A one-fan graphics card should have no issue fitting the connectors.- An ATX power supply will only fit into the case with the fan pointing outwards (you cannot point the fan towards the CPU.)Read moreRead less5 people found this helpfulHelpfulSending feedback...Thank you for your feedback.Sorry, we failed to record your vote. Please try againReportSending feedback...Thanks, we'll investigate in the next few days.Sorry, We failed to report this review. Please try again