Water Filter/Softener Air Gap With 3/4-inch Female Threaded Inlet for Use With 1-1/2-inch or 2 inches (with coupler) Standpipe (ET115-002, G-175, DLA-G15)
- 상품가
- $23.01 (약 30,707원)
- 면세 한도
- $200 (목록통관) · 이하라 면세 예상
- 예상 합계
- 약 30,707원 + 배송비
- 소재
- Polymer
- 브랜드
- AIR GAP INTERNATIONAL
- 색상
- White
- Connector Type
- Trap
- Thread Size
- 0.75 inches
가격 변동
가격 추적을 막 시작했어요
하루에 한 번 가격을 기록합니다. 기록이 이틀 이상 쌓이면 여기에 가격 변동 그래프가 그려져요.
한눈에 요약
Water Filter/Softener Air Gap With 3/4의 가격은 9월 28일 11:39 기준 $23.01(약 30,707원)입니다. 가격 이력이 아직 짧아 역대 최저가와 비교한 판단은 보류합니다. 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗
한국까지 예상 비용
- 상품가
- $23.01 (약 30,707원)
- 면세 한도
- $200 (목록통관) · 이하라 면세 예상
- 예상 합계
- 약 30,707원 + 배송비
- 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
- 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
- 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
- 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.
상품 특징
- Tools & Home Improvement
- Kitchen & Bath Fixtures
- Water Filtration & Softeners
- Water Softeners
- Image Unavailable Image not available forColor:
- ❤ FLOW RATE: The ET115-002’s minimum flow rate is 0.5 gallons per minute (GPM) and the maximum flow rate is 9 gallons per minute (GPM). The minimum and maximum flow rates through an air gap are the lowest and highest flow rates at which water does not splash outside of an air gap. At minimum or maximum flow rate, the air gap is dry on the outside.
- ❤ SIMPLE INSTALLATION: The ET115-002 is designed for connecting discharge water tubing from a water softener system to a drain line. Its 3/4-inch MIPT threaded inlet accepts a 3/4-inch threaded PVC pipe or the 3/4-inch threaded ET170-XXX series air gap adapters (models -009 to -014). The ET115-002 installs to a 1-1/2 inches OD standpipe or 2 inches OD standpipe with 2-inch couplers. The ET115-002 can be pressure fit or glued to a plastic standpipe.
- ❤ STANDPIPE CONNECTION: The ET115-002 connects to a 1-1/2 inches OD standpipe or 2 inches OD standpipe with couplers. The air gap’s flow capacity is 15 gallons/minute.
- ❤ DRY OPERATION: The ET115-002 is designed with a splash guard to assure a dry operation. It is also recommended to install the ET115-002 at least 18 inches above the P-Trap to avoid water splashing back from the air gap.
- ❤ CERTIFICATION: ET115-002 is UPC (Uniform Plumbing Code) IPC (International Plumbing Code) Listed. The testing is conducted for every manufactured lot to ensure consistent performance.