노트북 카메라 커버 슬라이드, 6팩 초박형 0.056cm 웹캠 커버 블로커

적당한 가격입니다

평균가(8,047원)보다 1% 저렴합니다.

$5.99 7,948원

10월 28일 01:36 기준 아마존 실시간 가격 확인 ↗

최저 $4.84 평균 $6.06 최고 $6.27

해외직접배송 · 관세·배송비 별도

역대 최고가 근처

그래프 로딩 중…

최저6,421
평균8,047
최고8,317
최근 갱신10월 28일 01:36

아마존 달러(USD) 가격을 각 날짜의 환율로 원화 환산해 표시합니다. 현재 환율 $1 = ₩1,327

⇄ 다른 상품과 가격 추이 비교

한눈에 요약

노트북 카메라 커버 슬라이드, 6팩 초박형 0.056cm 웹캠 커버의 가격은 10월 28일 01:36 기준 $5.99(약 7,948원)입니다. 추적 기간 역대 최저가는 $4.84(10월 8일), 평균은 $6.06로, 지금은 평균보다 1% 저렴합니다. 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗

한국까지 예상 비용

상품가
$5.99 (약 7,948원)
면세 한도
$200 (목록통관) · 이하라 면세 예상
예상 합계
약 7,948원 + 배송비
배송비 넣어 다시 계산해 보기 →
  • 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
  • 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
  • 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
  • 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.

상품 특징

  • 【프라이버시 보안 보호】네트워크 보안에 중점을 두어 이제 개인 및 가족 개인 정보 보안을 쉽고 효과적으로 보호할 수 있습니다. 슬라이드를 부드럽게 밀고 카메라를 닫기만 하면 해커의 침입을 막을 수 있습니다.
  • 【 초박형 디자인】두께가 0.1cm(0.04인치)에 불과한 새로운 초박형 디자인은 유연한 ABS 소재로 만들어졌으며 깨지지 않습니다. 노트북을 닫는 데 영향을 주지 않으며 노트북을 긁지 않습니다.
  • 【쉬운 설치】 강력한 접착제로 커버가 떨어지지 않으며, 설치 중에 화면을 깨끗하게 유지하고 얼룩이 생기지 않도록 하고, 뒷면의 접착 테이프를 떼어내어 카메라와 정렬한 다음 10초 동안 세게 눌러 작동합니다.
  • 【호환 제품】맥북 프로, 맥북 에어, 아이맥, 맥 미니, 아이패드, 맥북 에어, 아이폰 6/7/8 플러스 등 전면 카메라와 같은 노트북, 태블릿, 컴퓨터, 에코 쇼 및 애플 장치용 카메라와 호환됩니다.
  • [제품 구성] 블랙 웹캠 커버 6팩.
  • 카메라 프라이버시 커버 중 #3위
  • In the Internet age, we have to better protect our privacy. Inadvertently, hackers are lurking in networks that we cannot detect.
  • We need to take the initiative to protect the privacy of ourselves and our families!
  • Will not affect the closing of the laptops, Allows you to close the laptop's lid perfectly.
  • Flexible ABS material , not easy to break and not hurt the surface of the equipment.
  • Strong adhesive, not easy to fall off.
  • Our webcam cover slider is compatible with most models of laptop,computers, tablets, cell phones and other digital Devices.
  • 1. Not compatible with MacBook Pro 16 inch .
  • 2.Not compatible with Curved screen device,because the camera cover needs to be used on a flat surface.
  • 3.Not compatible with Some full-screen devices, prevent blocking the screen and sensing points.
  • -Only takes 4 steps.
  • The sliding cover part can be installed and removed.
  • To keep the camera cover overall thickness at 0.03 in without affecting the closing of the laptop, it is necessary to optimize the connection groove between the slide cover and the base. If the groove is too deep, the sliding cover is not easy to separate or remove, but the overall thickness will increase.
  • If the sliding cover is accidentally separated during installation,you don't worry, you can easily install it back.
  • 1. Be sure to keep the screen clean when installing.
  • 2. Do not peel and stick repeatedly, it will reduce the stickiness of the tape.
  • 3. Gently press for 10 seconds, the paste is firmer.
  • it's critical. I installed one on a MacBook and another on a slim laptop, and both close perfectly without any gap, an issue I've had with thicker, clunkier covers. The high-grade ABS plastic feels durable, and the strong adhesive backing feels significantly more robust than the flimsy tape on my old covers. So far, they've stayed firmly in place.The Privacy Performance TestThis is where these covers truly shine. I ran two simple but critical tests on both installed