Shars Bridgeport 202-5162 P용 2.5cm(1인치) R8 섕크 쉘 페이스 밀 아버 어댑터 홀더

상품 특징

• Industrial & Scientific
• Indexable Insert Holders
• Milling Holders
• Face Mill Holders
• Image Unavailable Image not available forColor:
• 1-1/2" 202-5164
• 1-1/4" 202-5163
• Shank Size: R8
• R8 taper is precision ground to achieve AT3 taper tolerance
• Arbor Diameter: 1"
• Arbor diameter is precision grounded by a CNC grinder to achieve H6 bore tolerance
• Drawbar Thread Size: 7/16x20UNF
• Shell Mill Range: 2-1/4" ~ 2-3/4"
• Gage Length: 1"
• Runout tolerance is within .0004" from R8 shank to face mill arbor
• Runout tolerance is within .0002" from R8 shank to face mill arbor
• Tool holder is made from drop forged alloy and heat treated to 56-58HRc
• Each holder comes with a lab certificate on its taper accuracy and runout measurement
• Bottom contact surface between face mill and this tool holder is precision ground finished
• Each key is precision milled and countersink and finished in black oxidized and assemble into the tool holder with screw
• Slot on the R8 shank is milled finished with equal amount of depth all the way down the shank and the slot is also longer than other imports
• #145,873 in Industrial & Scientific (See Top 100 in Industrial & Scientific)
• #3 in Face Mill Holders
• some things are overpriced and not that great, but there are some things that are unexpectedly good. This arbor is definitely the latter
• the first thing that I noticed is that it came an inspection report. Out of curiosity more than anything, I measured it to see if the report was actually for that arbor... It was, and all ofThe critical dimensions were comfortably within spec. It is such a nice fit in my face mills that I actually have to clean and stone the mounting surfaces and be very careful to keep the pilot straight when inserting it into the face mill. I didn’t bother to measure the runout because I get beautifully smooth finishes, which wouldn’t be possible if it wasn’t holding the tool true. It even came with an allen key for tightening the nut.Read moreRead less Michael5 out of 5 starsGreat quality!Reviewed in the United States on June 10, 2021Size: 1-1/2" 202-5164Verified PurchaseI have mixed feelings about Shars
• the first thing that I noticed is that it came an inspection report. Out of curiosity more than anything, I measured it to see if the report was actually for that arbor... It was, and all ofThe critical dimensions were comfortably within spec. It is such a nice fit in my face mills that I actually have to clean and stone the mounting surfaces and be very careful to keep the pilot straight when inserting it into the face mill. I didn’t bother to measure the runout because I get beautifully smooth finishes, which wouldn’t be possible if it wasn’t holding the tool true. It even came with an allen key for tightening the nut.HelpfulSending feedback...Thank you for your feedback.Sorry, we failed to record your vote. Please try againReportSending feedback...Thanks, we'll investigate in the next few days.Sorry, We failed to report this review. Please try againWe'll check