EHDIS 압력계, 전문 공기 압력 미터, 듀얼 포트 HVAC 디지털 압력계 가스 압력 테스터 차동 게이지

가격이 거의 변하지 않아요

역대 최저가와 최고가의 차이가 5%로 작아요. 언제 사도 가격 차이가 크지 않아요.

$44.99 59,693원

10월 28일 03:17 기준 아마존 실시간 가격 확인 ↗

해외직접배송 · 관세·배송비 별도

변동이 거의 없는 가격

보통 가격 57,039원 현재 59,693원

그래프 로딩 중…

가격거의 그대로57,039원~59,693원
평균57,318원
기록19일8/29~10/28

아마존 달러 가격을 오늘 환율($1 = ₩1,327)로 환산해 표시합니다. 그날 환율 기준 금액은 그래프를 짚으면 보입니다.

⇄ 다른 상품과 가격 추이 비교

한눈에 요약

EHDIS 압력계, 전문 공기 압력 미터의 가격은 10월 28일 03:17 기준 $44.99(약 59,693원)입니다. 기록된 19일 동안 가격 변동이 거의 없었습니다. 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗

한국까지 예상 비용

상품가
$44.99 (약 59,693원)
면세 한도
$200 (목록통관) · 이하라 면세 예상
예상 합계
약 59,693원 + 배송비
배송비 넣어 다시 계산해 보기 →
  • 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
  • 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
  • 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
  • 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.

상품 특징

  • 이 디지털 휴대용 압력계는 단일 파이프의 공기 압력 또는 두 파이프의 차압을 측정할 수 있습니다. 환기 및 공기 상태 시스템 측정에 적합하며 가스 측정, 보정 및 모든 가스 압력 시스템의 문제 해결에 널리 사용됩니다.
  • 32비트 MCU 및 24비트 ADC를 사용한 초저전력 감지 및 측정으로 에어 프레스를 빠르고 정확하게 측정할 수 있습니다. 탱크가 없는 히터 작업에 적합하며 전기 밸브에 가스 압력을 설정하는 데 매우 편리합니다. 가정용 보일러의 가스 압력 서비스 테스트에 사용, 욕실 팬 등에 대한 공기 흐름을 측정합니다.
  • 선택 가능한 압력 범위: ±2.999psi
  • 정확도: ±0.3%FSO (25°C에서)
  • 반복성: ±0.2% (최대 ±0.5%FSO)
  • 선형성/히스테리시스: ±0.29%FSO.
  • 12개의 선택 가능한 측정 단위(kPa, Psi, Kgfcm2, Ozin2, Bar, mbar, inHg, mmHg, InH2O, FtH2O, cmH2O, Pa) 기능: 데이터 홀드 및 오류 코드 - 응답 시간: 0.5초.
  • Ehdis 디지털 압력계에는 제공된 트윈 입력 프로브로 차동 가스 압력을 테스트/측정할 수 있는 이중 입력이 있습니다. 최대/최소 기록 기능, 데이터 저장 기능, 실내 온도 미래도 있습니다.
  • This Manometer can measure the air pressure of the single pipe or differential pressure of two pipes.it is suitable for measuring of ventilation and air condition systems,and widely use forgas measurement,calibration,and any trouble shooting of any gas pressure systems.
  • Ultra-low-power sensing & measurement with 32-bit MCU and 24-bit ADC make the measurement of air press faster and more accurately.Perfect for working on tankless heaters,Very handy to set gas pressures on electric valves,Using for service testing of gas pressure on domestic boilers, Measures Air Flow about your bathroom fan ect.
  • Selectable pressure range: ±2.999psi
  • Accuracy: ±0.3%FSO (at 25°C)
  • Repeatability: ±0.2% (Max ±0.5%FSO)
  • Linearity/Hysteresis: ±0.29%FSO
  • Response Time: 0.5 Seconds
  • Over Range Indicator: Err 0
  • Under Range Indicator: Err 1
  • Operating Conditions:0 to 50°C (32 to 122°F)
  • Storage Conditions: -10 to 60°C (14 to 140°F)
  • Battery:4.5V(3*1.5V/AAA) NOT included batteries
  • 1 x English User Manual
  • 1 x Protector Bag
  • 1 x Metal connector
  • 2 x Rubber tube
  • 산업용 및 과학용 중 #17,971위 (산업용 및 과학용 에서 상위 100개 보기)
  • this valve has small pressure taps built in to the body of the unit. The diagnostic process involves turning off the gas supply, opening the supply side pressure tap, hooking up a pressure meter to the tap, then turning the gas back on to measure pressure. Then repeating this exercise on the downstream side of the valve. Published data say the upstream side pressure should be in the range of 5 to 8 inches of water and the downstream side should be ~ 3” of water. I had the option of trying to purchase a “magnahelic” guage (high quality, but expensive), try to set up a classic U-shapped glass tube with water, or purchase an inexpensive digital pressure gage. Despite a couple of mediocre reviews for this digitial manometer I thought the purchase price ($49) was worth the risk. I am not able to calibrate this manometer, so I have to trust the readings out of the box. It gave me 5.77 inches of water on the supply side (OK reading) and 4.2” of water on the downstream side: significantly too high. I interpreted this to mean that the output tube was partially blocked and causing back-pressure, which would be consistent with the very low flame and low heat output that I saw. U