18W 핫 나이프 커팅 툴, 미디엄/로우 펄 면, EPP, KT 보드, EPS

상품 특징

• Arts, Crafts & Sewing
• Image Unavailable Image not available forColor:
• ✔【3-IN-1 STYROFOAM CUTTERS】Cut or engrave foam complete tool set. GOCHANGE 3 in1 foam cutter includes 18W power adapter, 12cm & 7cm wand style hot knife, 18cm bow hot blade, 10m replacement wire for bow, and cutter holder. Whether you are a DIY enthusiast, crafter or artist, the three different cutting wands can meet your needs.
• ✔【SUPER FAST HEATING SPEED】This Foam Cutting Tool is made of high quality stainless metal. With a 18W power output, the 7cm and 12cm cutting wand can reach 100℃ (212℉) in just 5 seconds. The maximum temperature of the 12cm wand can reach 350℃ (662℉), while the maximum temperature of the 7cm wand can reach 280℃ (536℉). The bow hot blade is stable at 200℃ (392℉).
• ✔【CLEAN-AND-SMOOTH CUTTING】This Heated Styrofoam Cutter heats up quickly, allowing for smooth and fast cutting of styrofoam. It seals the edges cleanly and No Debris! You can cut the foam boards or foam blocks from any angle and craft them into your desired shape. The different lengths of wand can cut various thicknesses of foam boards. (Before use, make sure power adapter is tightly plugged into socket, and the green power light is on)
• ✔【PREMIUM QUALITY】Foam Cutter Electric Styrofoam Cutting Tool is suitable for novices. Its handle is designed to be ergonomic and its heat-resistant temperature can reach 300℃, making it friendly to both novices and professionals. The anti-slip design on both sides of the handle provides excellent control and minimizes hand fatigue. It is an indispensable tool for foam cutting and engraving.
• ✔【PRODUCT USAGE】Hot Knife Foam Cutter precision cutting for a wide range of materials including pearl cotton, KT board, EPS, sponge, EPP, cellular glass with a thickness of 1-6cm and a medium to low density. You can cut foam from any angle and craft your own masterpiece, at the same time it is also perfect for commercial artwork development, complex and small font design in advertisement (such as letters), art piece creation by hobbyist, foam carving, DIY craft projects in home & school.
• ✔【USAGE SUGGESTIONS - 1】①The 7cm cutting knife is suitable for 1-4cm low-density foam board, pearl cotton, KT board, EPS, EVA, XPS, PE
• while the 12cm cutting knife is suitable for 1-7cm
• ②The heating wire should not be too loose or too tight, should be natural and flexible
• ③After the cutting work is completed, allow it to cool slightly, then wipe the foam off the cutting pen with a damp sponge
• ④Allow the cutting pen to rest after 15 minutes of use.
• ✔【USAGE SUGGESTIONS - 2】①For moderately high-density materials, adopt a "preheat + slow feed" approach
• for low-density materials, increase the movement speed to prevent scorching
• ②Allow the 7cm blade to preheat for 10–15 seconds, and the 12cm blade for 15–20 seconds
• ③ If the product is stored for over 3 months, preheat it before use by powering it on for 2 minutes and off for 1 minute, repeating this cycle 2–3 times.