AQUANEAT 소형 분수 펌프, 수족관 어항용 80GPH 수중 워터 펌프, 야외 분수, 수경재배, 연못 필터 펌프

조금 더 기다리세요

현재가가 평균보다 2% 높습니다. 가격 하락을 기다려 보세요.

$6.28 8,322원

10월 28일 01:40 기준 아마존 실시간 가격 확인 ↗

최저 $6.05 평균 $6.18 최고 $6.33

해외직접배송 · 관세·배송비 별도

변동이 거의 없는 가격

그래프 로딩 중…

최저8,020
평균8,183
최고8,382
최근 갱신10월 28일 01:40

아마존 달러(USD) 가격을 각 날짜의 환율로 원화 환산해 표시합니다. 현재 환율 $1 = ₩1,325

⇄ 다른 상품과 가격 추이 비교

한눈에 요약

AQUANEAT 소형 분수 펌프, 수족관 어항용 80GPH 수중 워터의 가격은 10월 28일 01:40 기준 $6.28(약 8,322원)입니다. 추적 기간 역대 최저가는 $6.05(10월 8일), 평균은 $6.18로, 지금은 평균보다 2% 비쌉니다. 실시간 가격과 재고는 아마존에서 확인할 수 있습니다. 아마존 실시간 가격 확인 ↗

한국까지 예상 비용

상품가
$6.28 (약 8,322원)
면세 한도
$200 (목록통관) · 이하라 면세 예상
예상 합계
약 8,322원 + 배송비
배송비 넣어 다시 계산해 보기 →
  • 국제 배송비는 아마존 결제 화면에서 확정돼요. 과세 대상이면 배송비에도 세금이 붙어 조금 늘어요.
  • 미국에서 보내는 물건은 목록통관 $200, 식품·건강기능식품·의약품(일반통관)은 $150 이하면 면세예요.
  • 같은 날 들어오는 여러 건은 합산해서 과세될 수 있어요.
  • 세율은 분류별 대표값이고 환율은 오늘 환율 기준이에요. 정확한 세액은 관세청 예상세액 조회에서 확인하세요.

상품 특징

  • Fish & Aquatic Pets
  • Aquarium Accessories
  • Aquarium Pumps & Filters
  • Image Unavailable Image not available forColor:
  • Adjustable flow rate: With a control knob, the maximal flow rate can be up to 80GPH(300L/H)
  • Recommend maximum lift height: 1 foot. 80GPH is the theoretical flow rate at zero lift
  • the actual output decreases with pipe resistance, lifting height. And the higher the lifting height is, the lower the flow rate will be. For example, the flow rate is 80 GPH at 0 ft (without any water pipe), 40 GPH at 1 ft, 25 GPH at 1.5 ft, and nearly 0 GPH at 2 ft. Measure fountain height before purchase for proper fit.
  • Optional 2 outlets: Fits 5/16"or 1/2"ID (inside diameter) tubing.
  • Dimension: 2" x1.75" x1.25"(L x W x H), mini size, easy to hide or disguise
  • Length of power cord: 6 feet. Note: This water pump is only suitable for small fish tanks under 5 gallons.
  • Wide application: Perfect for water fountains, pet fountain, aquariums, table fountains, waterfalls, hydroponic systems, irrigation systems and for use in any other water features.
  • Note: To ensure the water pump operates properly, the following steps must be taken: ‌Submersion Requirement‌: The pump must be fully submerged in water. ‌Inlet Clearance‌: The water inlet should be at least ‌50mm‌ below the water surface. ‌Air Removal‌: For the first startup or after water replacement, gently shake the pump to expel any trapped air inside.