Zoofen 교체용 수하물 휠 수리 여행 가방 가방 부품 스피너 휠 캐스터 여행용 세관 상자 W044 (A 세트 4개)

상품 특징

• 포장 목록: 수하물 바퀴 4개(W044, A 세트), 사진에 나와 있으며 나사가 함께 제공됩니다
• 수하물 교체 휠의 소재: PVC + PP + 베어링
• 수하물 휠 호환성: 이 수하물 휠은 보편적이지 않습니다. 휠 모양, 구멍 피치 거리(중앙에서 중앙까지) 및 휠의 휠 크기가 바퀴와 모두 동일할 때만 (페이지의 두 번째 그림 참조), 수하물에 적합할 수 있습니다
• 제품 특징: 내마모성, 같은 크기의 불량 수하물 바퀴를 교체하는 데 적합합니다. DIY에 대한 강력한 능력이 필요합니다(설치 정보는 마지막 사진이나 비디오를 참조할 수 있습니다)
• 서비스: 어떤 모델이 필요한지 정확히 모르는 경우 휠 크기와 나사 구멍 간격의 사진을 보내주세요(그림 2 참조). 휠 나사 구멍 간격을 알려주시면 조언을 드리겠습니다
• Wear resistant and sturdy,360 degree rotation
• Material of these luggage replacement wheels: PVC + PP + Bearing
• Packing list :4 pcs wheels, as photo show and come with Screws
• Suitable for repairing luggage with broken wheels, but you need carefully read the Size details of the wheels before order.
• 의류, 신발 및 보석 중 #421,240위 (의류, 신발 및 보석 에서 상위 100개 보기)
• it’s been perfect for my 2-3 week trips to Switzerland. As I have to check my bag anyway because of my trekking poles I couldn't use the smaller check in sized bags, so I thought I’d give these replacement wheels a try. They arrived within a week, the package included 4 wheels, 4 matching inner plates, and screws. The quality of the wheels is great, seemingly better than what’s on newer suitcases. I’d picked up some tips from previous reviews (thanks, everyone!) and will add some of my own. Supplies needed: a good Phillips screwdriver, a good utility knife, a well-lit area, and a healthy dose of patience. Nice to have: a good counter to work on, clothespins/binder clips to hold back the lining, a strong flashlight, and a thin brush to clean adjusted holes. The inner plates that came with the wheels seemed too deep to work well with my suitcase so I decided to use the new wheels but use my old inner plates and the older slightly longer screws. I determined that what I then needed was for the old plate holes to match up with the new wheel “pegs” that would need to receive the screw. This took some carving of the inner plate with the utility knife to lengthen the holes so they’d match up with the “pegs” (see photo, yellow area indicates what I needed to carve). I carefully carved away on both sides of the inner plate so that the peg would fit securely in the correct area of the inner plate. When enlarging be careful to maintain an oblong shape or you’re going to need a washer under the screwhead which will negate the benefit of the longer screw. I did not need to make larger holes in the suitcase itself as some have reported, but did need to shave away some of the white corrugated plastic of the suitcase’s structure (see photo, again, yellow area was what was carved). I wasn’t too scared to do this when some of the areas looked like the original wheel installer had to do the same! This was the easy part. The hardest part that required the patience was working in small, dark quarters as I pushed the wheel pegs through the existing holes, matched up the inner plate, and then by feel, intuition, and prayer inserted the screw (doing the most difficult position to reach first) and tried to locate the receiving hole. After I located the first peg hole I worked it like changing a tire, tightening the screw just enough to hold, then going to the next screw, using the flashlight to locate the hole and orient myself as to where to place the screw. O